Quick Answer: How do I create a new front view in Solidworks?

How do I create a new view in Solidworks?

Creating a Custom View

1. Use the Rotate, Zoom, and Pan commands to create the desired view. …
2. Press the spacebar to open the Orientation dialog box.
3. In the dialog box, click New View .
4. Type a name in the dialog box and click OK.

How do you create a front plane in Solidworks?

Select the sketch in the FeatureManager design tree, and click Edit, Sketch Plane. Right-click the sketch in the FeatureManager design tree, and select Edit Sketch Plane . Select a new plane in the FeatureManager design tree or select a new planar face in the model for Sketch Plane/Face . Click OK .

How do I save a 3D view in SOLIDWORKS?

At the bottom of the SOLIDWORKS window, on the 3D Views tab, click Capture 3D View. Click Capture 3D View (MBD CommandManager or toolbar).

How do you flip an isometric view in SOLIDWORKS?

Rotating a Drawing View Around its Center Point

1. Click Rotate View. (View toolbar), or right-click the view and select Zoom/Pan/Rotate > Rotate View. …
2. Do one of the following: Drag the view to the desired rotation. …
3. Set options, then click Apply: …
4. Click Close to close the dialog box.

How do I create a new coordinate system in Solidworks?

To create a coordinate system:

1. Click Coordinate System (Reference Geometry toolbar) or Insert > Reference Geometry > Coordinate System .
2. Use the Coordinate System PropertyManager to create the coordinate system. You can amend your selections: …
3. Click .

How do you change the plane view in Solidworks?

Select the top view from view orientation of “Heads-up View Toolbar” or press “ctrl+5” then click Update Standard View button and choose the front view. A pop-up message will show-up to confirm if you want to change the view, click yes. This feature is the easiest way to change the orientation of your part.

How do you change top plane to front plane?

Let’s say that for design reasons we want the sketch on the top plane. To change the plane, right click on the sketch in the Feature Manager and select the Edit Sketch Plane Icon. When you do, the Edit Sketch Plane command opens. To change the plane, right click in the window and clear the selections.

How do you make a 3 view drawing in Solidworks?

To create the Standard 3 View by the standard method:

1. In a drawing, click Standard 3 View. (Drawing toolbar), or click Insert > Drawing View > Standard 3 View. …
2. Select the model in one of these ways: Select a model from Open documents in the Standard 3 View PropertyManager or browse to a model file and click.

How do I add a view layout in Solidworks drawing?

You can create layouts using the Layouts tool.

…

Creating Layouts

1. In the graphics area, select a drawing view.
2. Click Sheets > Layouts or View > Create Layout. …
3. Add views by dragging and dropping them to the layout.

How do you add a view to a drawing?

In a drawing with parts or assemblies open:

1. Select the Task Pane and the View Palette .
2. Select the part or assembly that you want to insert from the list in the upper left corner of the View Palette.
3. Drag a view into the graphics area.

How do you use alternate position view?

Insert a model view of the assembly using the orientation needed for the Alternate Position View. Position the assembly in its starting position. (Drawing toolbar), or click Insert > Drawing View > Alternate Position. The Alternate Position PropertyManager appears.

What is an auxiliary view in SolidWorks?

An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view. You can use sketched lines for folding.