Quick Answer: Can you measure different dimensions using different units in Fusion 360?

How do you change the dimension units in Fusion 360?

Click the profile in the upper right corner of Fusion 360. Select Preferences from the drop down menu.

…

Click Design under Default Units.

1. Change the Default units for new design to the desired unit. ( metric or imperial)
2. Click Apply.
3. Click Ok.

How do you change dimensions in fusion?

Simply right-click on a radius dimension that was applied (by default) to the arc. Then, click on the option that says “toggle Diameter”. You’ll then see the arc has the diameter applied. Fusion 360 will automatically double the radius value, leaving you with the same dimension.

How do I change the grid size on Fusion 360?

Solution:

1. Select Grid Settings.
2. Change from Adaptive or Fixed. If fixed, set your Major grid spacing length, as well as the amount of subdivisions that you want.
3. For increment settings, go back into the Grids and Snaps menu.
4. Change from Adaptive or Fixed increments.

How do you show dimensions?

For example, a dimension of a rectangular room on a blueprint, 14′ 11″ X 13′ 10″ equates to a room size of 14 feet, 11-inches wide by 13 feet, 10-inches long. Dimensions are expressed as width by length by height or depth in three-dimensional space.

How do I make dimensions horizontal in Fusion 360?

Create horizontal or vertical linear dimensions

1. On the toolbar, select Dimension > Linear Dimension .
2. On the sheet, select the first point to measure.
3. Select the second point.
4. Move the mouse pointer to position the dimension. …
5. Click to place the dimension.