Question: What are restraints in SolidWorks?

What is a fixture in Solidworks?

The Fixture PropertyManager allows you to prescribe zero or non-zero displacements on vertices, edges, or faces for use with static, frequency, buckling, dynamic and nonlinear studies. Contents.

What is bonded in Solidworks?

The program bonds the Set 1 and Set 2 (source and target) entities defined in the Contact Set PropertyManager. Bonded entities behave as if they were welded. This option is available for static, nonlinear, frequency, buckling, and thermal studies.

What is inertia relief in Solidworks?

Use inertial relief to calculate stresses and deformations on a free body that is accelerating such as a rocket being propelled by its engine, an aircraft in flight, or a moving automobile. If a model is not adequately restrained, a small force can cause rigid body motion.

What is a foundation bolt in SolidWorks simulation?

SolidWorks Simulation can also simulate the behavior of a foundation bolt (or grounded bolt) that attaches a part to a virtual ground (which is infinitely stiff).

How do you simulate in SolidWorks?

1 Click Tools, Add-Ins. The Add-Ins dialog box appears. 2 Check the checkboxes next to SolidWorks Simulation. If SolidWorks Simulation is not in the list, you need to install SolidWorks Simulation.

How do you insert a line break in SolidWorks?

To create a projection split line:

1. Click Split Line. (Curves toolbar) or Insert > Curve > Split Line.
2. In the PropertyManager, under Type of Split, select Projection.
3. Under Selections, click: A sketch for Sketch to Project. . You can select multiple contours from the same sketch to split. …
4. Click . Before. After.

What is global contact solidworks?

The Global Contact gets defined automatically when a multi-part or assembly study is defined. The type of the Global contact will be set to Bonded by default. It is recommended to leave this option as Bonded, as any component contact or local contact overrides the Global Contact set.

How do you control a mesh in Solidworks?

To apply mesh control to multiple components:

1. In the Simulation study tree, right-click the Mesh icon and select Apply Mesh Control. …
2. Click the FeatureManager design tree tab .
3. In the FeatureManager flyout, select the components to which you want to apply mesh control. …
4. Under Selected Entities, select Use per part size.

What is a compatible mesh?

In a compatible mesh, touching entities are meshed so that there is a node-to-node correspondence between the mesh of each entity. Nodes in correspondence can be merged (for a bonded contact), or superposed.

What is soft spring in Solidworks simulation?

Check this option to instruct the program to add soft springs to prevent instability. If you apply loads to an unstable design, it will translate and/or rotate as a rigid body. You should apply adequate restraints to prevent rigid body motion.

Can we select inertia relief analysis in Workbench?

Ansys Workbench Mechanical supports Inertia Relief in a static analysis. An example helps explain Inertia Relief. Consider a structure that has mass, and a vertical load that exceeds its weight.