Question: How do I thicken multiple surfaces in Solidworks?

How do I change thickness in Solidworks?

To set line thickness:

  1. In a drawing, click Tools > Options > Document Properties > Line Thickness.
  2. In the dialog box, under Line thickness print settings, enter a value for the line weights (Thin, Normal, Thick, and five additional line thickness settings). …
  3. Click OK.

How do you use the knit surface in Solidworks?

To knit surfaces:

  1. Click Knit Surface on the Surfaces toolbar, or click Insert > Surface > Knit. Create adjacent, non-intersecting surfaces.
  2. In the PropertyManager, under Selections: …
  3. Select Gap Control to view edge pairs that might introduce gap problems, and to view or edit the knitting tolerance or gap range. …
  4. Click OK .

How do I fill a surface in Solidworks?

To create a filled surface, click Filled Surface on the Surfaces toolbar, or click Insert > Surface > Fill, set the PropertyManager options, and click OK .

Can you extrude a surface in Solidworks?

You can select either a surface or the face of a solid body. You can also preselect the 3D faces to extrude before clicking Insert > Surface > Extrude. Select other faces to define the extrude as required.

IT IS INTERESTING:  How do I move a row of data in Revit?

How do you thicken a lofted surface in Solidworks?

To thicken a surface:

  1. Click Thicken on the Features toolbar, or click Insert > Boss/Base > Thicken.
  2. Under Thicken Parameters, do the following: In the graphics area, select a Surface to Thicken . Examine the preview, and select the side of the surface you want to thicken, as shown below. …
  3. Click OK . Original surface.

How do you make a part thinner in Solidworks?

In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.

How do you use boundary surfaces in SolidWorks?

To create a boundary surface feature, click Boundary Surface (Surface toolbar) or Insert > Surface > Boundary Surface, set the PropertyManager options, then click . Curve callouts colors match those used in the PropertyManager. Click callouts to change the Tangent Type.

Where is the surfaces toolbar in SolidWorks?

To display SOLIDWORKS toolbars: Right-click in the window border and select or clear a toolbar name. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.

How do I change solid to surface in SolidWorks?

To access this functionality, in the FeatureManager design tree, right-click the part name and click Convert to Bodies.



Converting Features to Bodies and Surfaces

  1. Under File Name, change the name to Housing2. SLDPRT.
  2. Select Save as.
  3. Select Preserve reference geometry and sketches.
  4. Click OK.

How do you fill a hollow surface in SolidWorks?

To convert a boundary surface into a solid, click Insert > Surface > Boundary Surface, and in Options and Preview, click Create solid. To convert a trim-surface feature into a solid, click Insert > Surface > Trim Surface and in Surface Split Options, click Create solid.

IT IS INTERESTING:  What is Map Explorer in AutoCAD?

How do you extrusion in SOLIDWORKS?

Click Convert to Extrusion (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Extrude, and click in the graphics area to establish the direction of the extrusion. The Base-Extrude PropertyManager appears.

What is revolve in SOLIDWORKS?

Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.

How do you trim a surface in SOLIDWORKS?

To trim a surface:

  1. Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face.
  2. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.
  3. In the PropertyManager, under Trim Type, select a type:
Special Project