Question: How do I change material thickness in Solidworks?

How do I change thickness in Solidworks?

To set line thickness:

  1. In a drawing, click Tools > Options > Document Properties > Line Thickness.
  2. In the dialog box, under Line thickness print settings, enter a value for the line weights (Thin, Normal, Thick, and five additional line thickness settings). …
  3. Click OK.

How do you add material thickness in Solidworks?

In the dialog box:

  1. Right-click Custom Materials and click New Category.
  2. Right-click New Category and click New Material.
  3. Set the custom material properties on each tab as required.
  4. Click the Sheet Metal tab. …
  5. Select Thickness Range.
  6. Click Add twice.
  7. For each row in the table, set the following: …
  8. Click Apply and Close.

How do you change the thickness of a Sheet Metal part in Solid Edge?

Answer. Use the Gage tab on the Material Table dialog in Sheet Metal to set the part thickness and bend radius.

Where is the thickness on Solidworks?

You can find the Thickness Analysis tool in the Evaluate tab of your Command Manager or in the Tools dropdown at the top right. Thickness Analysis is part of the SOLIDWORKS Utilities add-in, which contains a suite of tools used to evaluate solid geometry.

IT IS INTERESTING:  How do I open a schematic in AutoCAD?

How do you make a part thinner in Solidworks?

In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.

How do you use the shell tool in Solidworks?

The Solidworks shell tool is located in both features commandmanager and Insert menubar.



How to Use Solidworks Shell Tool

  1. Step 1: Create New Part File. Open Solidworks CAD software and create new part file. …
  2. Step 2: Create Rectangle Box. …
  3. Step 3: Select SolidWorks Shell Tool. …
  4. Step 4: Apply Solidworks Shell Tool.

How do you use the knit surface in Solidworks?

To knit surfaces:

  1. Click Knit Surface on the Surfaces toolbar, or click Insert > Surface > Knit. Create adjacent, non-intersecting surfaces.
  2. In the PropertyManager, under Selections: …
  3. Select Gap Control to view edge pairs that might introduce gap problems, and to view or edit the knitting tolerance or gap range. …
  4. Click OK .

How do I merge surfaces in Solidworks?

In the PropertyManager, under Selections:

  1. Select faces and surfaces for Surfaces and Faces to Knit .
  2. Select Try to form solid to create a solid model from enclosed surfaces.
  3. Select Merge entities to merge faces with the same underlying geometry.

What is K-factor sheet metal?

In sheet metal, the K-factor is the ratio of the neutral axis to the material thickness. When a piece of metal is being formed, the inner portion of the bend compresses while the outer portion expands (see Figure 1).

IT IS INTERESTING:  Does solidworks need lots of RAM?

How do you use a gauge table in Solidworks?

After creating the base flange, access the sheet metal gauge table by right-clicking Sheet-Metal in the FeatureManager design tree and selecting Edit Feature. Use a sheet metal gauge/bend table to specify both thickness and bend values with a single table.

How do you add a gauge table in Solidworks?

We launch the SOLIDWORKS software, and choose OPTIONS>SYSTEM OPTIONS>FILE LOCATIONS. From the pull-down menu, we choose “Sheet Metal Gauge Tables” and then point to the appropriate folder. Pointing SOLIDWORKS to the folder containing the sheet metal gauge tables.

Special Project