How many types of trim are in Solidworks?

What is TRIM command in SOLIDWORKS?

You can use Power trim to trim multiple, adjacent sketch entities by dragging the pointer across each sketch entity.

What is trim entity SOLIDWORKS?

Trims open sketch entities outside of two bounding entities. Trimming with Trim to Closest. Trimming a 3D Sketch. Trim PropertyManager. You can use the Trim PropertyManager to select a trim type and control other trimming options.

Can you trim in SOLIDWORKS?

To trim with the Power trim option: Right-click the sketch and select Edit Sketch. (Sketch toolbar) or Tools > Sketch Tools > Trim. Click in the graphics area next to the first entity, and drag across the sketch entity to trim.

Where are trim entities SOLIDWORKS?

Click Trim Entities on the Sketch toolbar, or click Tools, Sketch Tools, Trim. In the PropertyManager, under Options, select Trim away outside . Select two bounding sketch entities. Select the sketch entities to trim.

How do you trim a surface in Solidworks?

To trim a surface: Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.

How do you cut a shape in Solidworks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

How do you cut a 2D shape in Solidworks?

To cut a feature:

1. Edit a sketch.
2. Select the sketch entities required for the feature. …
3. Hold Ctrl and select a face to be the starting point for the cut.
4. Click Cut (2D to 3D toolbar), or click Tools > Sketch Tools > 2D to 3D > Cut, and click in the graphics area to establish the direction of the cut.

How do you make a circular pattern in Solidworks?

To create circular sketch patterns:

1. In an open sketch, click Circular Sketch Pattern (Sketch toolbar) or Tools > Sketch Tools > Circular Pattern.
2. In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern .
3. Under Parameters: Click Reverse direction . …
4. Click .

How do you trim a 3D object in Solidworks?

To trim a 3D sketch:

1. Start the 3D sketch on a 2D plane.
2. Then do either of the following: Right-click and select 3D sketch on a plane. Double-click a plane or sketch entity. You can use any of the following trim options: Power trim. Corner. Trim away inside. Trim away outside. Trim to closest.

How do I convert entities in Solidworks?

To convert an entity:

1. In an open sketch, click a model edge, loop, face, curve, external sketch contour, set of edges, or set of curves. You can also click an entity after clicking the Convert Entities. …
2. Click Convert Entities. …
3. In the PropertyManager, click Select chain to convert all contiguous sketch entities. …
4. Click .

How do you mirror in Solidworks?

To mirror a feature: Do one of the following: In a part, click Mirror (Features toolbar) or Insert > Pattern/Mirror > Mirror. In an assembly, click Assembly Features (Assembly tab on the CommandManager) and click Mirror , or click Insert > Assembly Feature > Mirror.

How do you use smart dimension in Solidworks?

To add a dimension to a sketch or drawing:

1. Click Smart Dimension. on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart. …
2. Select the items to dimension, as shown in the table below. You can undo previous selections by pressing Esc. …
3. Click to place the dimension. To dimension the…

How do you offset entities in Solidworks?

In an open sketch, select one or more sketch entities, a model face, or a model edge. (Sketch toolbar) or Tools > Sketch Tools > Offset Entities. Set the properties in the Offset Entities PropertyManager. When you click in the graphics area, the offset entity is complete.