How do you wrap text on a curved surface in SolidWorks?

How do you draw a Sketch on a curved surface in Solidworks?

Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.

How do you wrap text around a cone in Solidworks?

Make sure that the text inserted is on the same plane you created but inserted as a different sketch than the construction lines you have created. Click the wrap feature, choose the sketch of the text you are wrapping and the face of the cylinder and you are all done!

How do I use the wrap feature in Solidworks?

Wrap

1. Select the sketch you want to wrap from the FeatureManager design tree. …
2. Click Wrap on the Features toolbar, or click Insert > Features > Wrap.
3. In the PropertyManager, under Wrap Type: …
4. If you select Emboss or Deboss , you can select a line, linear edge, or plane to set a Pull Direction . …
5. Click OK .

How do you bend a shape in SolidWorks?

To create a sketched bend feature:

1. Sketch a line on a planar face of the sheet metal part. …
2. Click Sketched Bend. …
3. In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
4. Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .

How do you draw words on a curve?

Create curved or circular WordArt

1. Go to Insert > WordArt.
2. Pick the WordArt style you want.
3. Type your text.
4. Select the WordArt.
5. Go to Shape Format > Text Effects > Transform and pick the effect you want.

What is the curved surface area of a cylinder?

The radius ‘r’ of a cylinder is the radius of its base. Now, the area of the rectangle = length × breadth. 2πr is the circumference of the circle and h is the height. Area of the curved surface will be = 2πr × h = 2πrh.

How do you wrap an image in Solidworks?

Check PhotoView 360 in the menu. Select the surface where you want to project the Display image. Click on the “Fit width to selection” option. (You can also change the size of the image by dragging onto the green corner points) and drag the image over the display to cover the complete surface.

What is pull direction in wrap solidworks?

For a line or linear edge, the pull direction is the direction of the selected entity. For a plane, the pull direction is normal to the plane. Pull direction – Plane A. Pull direction – Plane B. To wrap the sketch normal to the sketch plane, leave Pull Direction blank.

How do I make text bigger in Solidworks?

You can set a custom text scale for text annotations in parts and assemblies. To set a custom text scale: Click Tools > Options > Document Properties > Detailing . In the dialog box, clear Always display text at the same size.