How do you unlink a section view in SolidWorks?

How do you make a section view independent in Solidworks?

For views that are aligned, you can break the alignment and move the views independently. To break a view’s alignment: Right-click inside the view boundary. Select Alignment > Break Alignment, or click Tools > Align Drawing View > Break Alignment.

How do you reassign views in Solidworks?

Changing the Orientation of the Standard Model Views

  1. Do one of the following: Use the Rotate, Zoom, and Pan tools to orient the model. Click View Selector and select a view. …
  2. Click Update Standard Views .
  3. When prompted, select the standard view you want to assign the current view to.
  4. Click Yes to confirm the update.

What is a removed section view?

The removed section view is a zero-thickness slice through the model showing only cut edges and hatching perpendicular to the cutting line. That’s different than the traditional section view, which is projected parallel to the cutting line.

How do I create a custom section view in Solidworks?

Creating a Section View Manually

  1. Click Section View. (Drawing toolbar), or Insert > Drawing View > Section. …
  2. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager.
  3. Sketch a section line. …
  4. Click to place the view.
IT IS INTERESTING:  What is the function key for snap in AutoCAD?

How do you move a section view arrow in Solidworks?

When you create a view letter attached to a view arrow, such as an auxiliary view or projected view, you can move the view letter. This is similar to moving the view letter in a section view. To move a view arrow letter: Select the arrow and drag the letter.

How do you reset isometric view in SOLIDWORKS?

To change the orientation of a section or aligned section view to isometric: Right-click a section or aligned section view and select Isometric Section View. To remove the isometric orientation, right-click the view and select Remove Isometric View.

How do you flip an isometric view in SOLIDWORKS?

Rotating a Drawing View Around its Center Point

  1. Click Rotate View. (View toolbar), or right-click the view and select Zoom/Pan/Rotate > Rotate View. …
  2. Do one of the following: Drag the view to the desired rotation. …
  3. Set options, then click Apply: …
  4. Click Close to close the dialog box.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

How do you use a phantom line?

Phantom Line



Phantom lines are long-short-short-long lines most often used to show the travel or movement of an object or a part in alternate positions. It can also be used to show adjacent objects or features.

What is a revolved section view?

A revolved view is a cross section of an existing view, revolved 90 degrees around a cutting plane projection. You can use a cross section created in the 3D model as the cutting plane, or you can create one on the fly while placing the view.

IT IS INTERESTING:  Frequent question: What environment do rhinos live in?
Special Project