How do you split a part into two parts in SolidWorks?

How do you split a part in SolidWorks 2020?

To use the Split PropertyManager to divide a part into multiple bodies:

1. In a part, create a sketch to be used to cut the part into bodies.
2. Click Split (Features toolbar) or Insert > Features > Split.

How do you split a drawing in SolidWorks?

To split a sketch entity:

1. In an open sketch, click Split Entities. (Sketch toolbar) or Tools > Sketch Tools > Split Entities. …
2. Click the sketch entity at the location where you want the split to occur. The sketch entity splits into two entities, and a split point is added between the two sketch entities.

Can you split a part in Solidworks?

Use the Split feature to create multiple parts from an existing part. You can create separate part files, and form an assembly from the new parts. You can split one or more solid or surface bodies.

How do I create a multi body part in Solidworks?

To save an assembly as a multibody part document:

1. Open an assembly document.
2. Click File > Save As. The Save As dialog box appears.
3. Set the Save as type to Part (*. prt, *. …
4. Select one of the following: Exterior Faces to save the exterior faces as Surface Bodies . …
5. Select or clear the following: …
6. Click Save.

How do you cut intersecting parts in SolidWorks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

How do you split a line in SolidWorks?

To create a projection split line:

1. Click Split Line. (Curves toolbar) or Insert > Curve > Split Line.
2. In the PropertyManager, under Type of Split, select Projection.
3. Under Selections, click: A sketch for Sketch to Project. . You can select multiple contours from the same sketch to split. …
4. Click . Before. After.

How do I cut a half sketch in Solidworks?

(Drawing toolbar) or Insert > Drawing View > Section. In the Section View PropertyManager, click Section or Half Section. You can use Tab to switch between Cutting Lines in Section or Half Section. After you select and place the cutting line in the drawing view, the Section View popup displays.

How do I add a part to a part in SolidWorks?

With a part document open, click Insert Part (Features toolbar) or Insert > Part. Browse to a part document and click Open. The Insert Part PropertyManager appears. Under Transfer, select any combination of items from the inserted part to be included in the derived part.