How do you scale down a dimension in Solidworks?

How do you scale down a drawing in Solidworks?

To scale a sketch:

1. In an active sketch, click Modify Sketch. (Sketch toolbar) or Tools > Sketch Tools > Modify.
2. In the dialog box, under Scale About, select one of the following: Option. Description. Sketch origin. …
3. Type a value for Factor, and press Enter. You cannot scale a sketch that has external references.
4. Click Close.

How do I change the scale in Solidworks?

You can change the scale of a drawing sheet by selecting a scale from a predefined list or specifying a custom scale. To change the scale of an existing drawing sheet: In the status bar, click Sheet Scale and click a scale. If there are annotations in the drawing sheet, specify options in the dialog box and click OK.

How do you change the scale of a drawing?

Task 1: Rescale a drawing, using the same unit

Start the scaling command with SC (or SCALE). Make a selection for the objects that need to be included in the scaling operation. Click in the drawing for the first point of the scaling base (base point). Type R to activate Reference scaling.

How do you scale a graphic in Solidworks?

(Sketch toolbar) or click Tools > Sketch Tools > Sketch Picture.
…
To use the scale tool:

1. Place the left end of the scale tool at one end of the picture. …
2. Drag the right end of the scale tool to extend the length of the line. …
3. In the Modify dialog box for dimensions, enter a value for the desired measurement and click .

How do you do scale models?

Scale the dimensions down to model size. This is accomplished by dividing the length by a consistent number. For example, achieving a model that is 1/30th the size of the original requires dividing all original measurements by 30.

What is a scale bar?

Scale bars provide a visual indication of distance and feature size on the map. A scale bar is a line or bar divided into parts. It is labeled with its ground length, usually in multiples of map units, such as tens of kilometers or hundreds of miles. Scale bars are associated with a map frame in a layout.

How do you scale down dimensions?

To scale a measurement down to a smaller measurement, for instance, when making a blueprint, simply divide the real measurement by the scale factor. The scale factor is commonly expressed as 1:n or 1/n, where n is the factor.

How do you scale dimensions?

To scale an object to a larger size, you simply multiply each dimension by the required scale factor. For example, if you would like to apply a scale factor of 1:6 and the length of the item is 5 cm, you simply multiply 5 × 6 = 30 cm to get the new dimension.

How do you do scale factor?

The basic formula that is used for calculating the scale factor is, Scale factor = Dimension of the new shape ÷ Dimension of the original shape. In case, if the original figure is scaled up, the formula is written as, Scale factor = Larger figure dimensions ÷ Smaller figure dimensions.

Can you scale a Solidworks assembly?

To scale an entire SOLIDWORKS assembly, it is possible to scale each part independently, however this could be extremely tedious for an assembly with a large number of components. Alternatively, you can save the assembly as a multi-body part and scale this part in a single step.