How do you save a body as a part in SolidWorks?

How do I export a solidworks body?

To export a multibody part document:

1. With a multibody part document open, select at least one face or solid body in the graphics area, or one solid body from the Solid Bodies folder in the FeatureManager design tree, and click Save As. …
2. Set the Save as type to the desired file type and click Save.

How do you save individual parts in assembly in Solidworks?

Save Assembly as Part PropertyManager

1. In an assembly, click File > Save As.
2. Select Part (*. prt;*. sldprt) for the file type.
3. Select Include specified components.
4. Select Override defaults.
5. Click Save.

How do you save a part in Solidworks?

In an assembly, in the graphics area or FeatureManager design tree, right-click a component or Ctrl + select multiple components and click Make Independent . In the dialog box, click OK when asked to save the component with a new name. In the Save As dialog box, type a name and click Save.

Can you split an assembly in Solidworks?

You can create separate part files, and form an assembly from the new parts. You can split one or more solid or surface bodies. To split a surface, the Trimming Surface must extend past the boundaries of the surface to split.

How do you save a multi body part in assembly in SolidWorks?

To save a part as an assembly and create instance counts from similar bodies:

1. Click Insert > Features > Save Bodies.
2. In the Save Bodies PropertyManager, under Create Assembly, select Derive resulting parts from similar bodies or cut list.

How do you make a multi body in SolidWorks?

Saving an Assembly as a Multibody Part

1. Open an assembly document.
2. Click File > Save As. The Save As dialog box appears.
3. Set the Save as type to Part (*. prt, *. …
4. Select one of the following: Exterior Faces to save the exterior faces as Surface Bodies . …
5. Select or clear the following: …
6. Click Save.

How do you save a Solidworks assembly as a step file?

STEP Export Options

1. Click File > Save As.
2. Select a STEP file type for Save as type, then click Options.
3. Select from the options described below, then click OK.
4. Click Save to export the document.

How do I add assembly to part in Solidworks?

To insert a new subassembly: Do one of the following: In the FeatureManager design tree, right-click either the top-level assembly icon or the icon for an existing subassembly, and select Insert New Subassembly. Click New Assembly (Assembly toolbar) or Insert > Component > New Assembly.

How do I isolate and save a part in Solidworks?

To isolate components: Select the components to isolate in the graphics area or the FeatureManager design tree. Click View > Display > Isolate, or right-click and click Isolate. To isolate components that share a mate, right-click the mate in the FeatureManager design tree and click Isolate.

How do I save virtual components as standard parts?

To save a virtual component: Do one of the following: Close an assembly that contains unsaved virtual parts or assemblies. Right-click a virtual component and select Save Part(in External File) or Save Assembly(in External File).

How do I create a virtual part in Solidworks?

To make externally saved components virtual while inserting them into an assembly:

1. Do one of the following: …
2. In the PropertyManager, under Options, select Make Virtual.
3. Under Part/Assembly to Insert, select or browse to a component and click to place it in the graphics area. …
4. Click OK.

How do you use solid bodies in SolidWorks?

Grouping Bodies into Folders

1. Expand Solid Bodies in the FeatureManager design tree.
2. Right-click a solid body name, select Add to New Folder, and name the folder. The selected solid body is listed in the new folder. You can drag other bodies into the same folder, and create other new folders and subfolders.