How do you put a sink in a countertop in Revit?

How do you center a sink on a countertop?

Mark the center of the sink on its back lip. Lay the sink upside down on the counter. Align the mark on the sink with the one on the counter. Adjust the sink to leave 1½ inches between its back edge and the backsplash.

How do you cut a void counter in Revit?

Cutting with voids in families when loaded

1. Open the Revit family with unattached voids and click Create tab Properties panel Family Category and Parameters.
2. In the Family Category and Parameters dialog, select Cut With Voids when Loaded and click OK.
3. Load the family into the project and place it.

Can you install a new sink in existing countertop?

Yes, a regular sink can be replaced by a farmhouse style. Yes, one can be installed in an existing countertop, even granite. Yes, it can be installed in an existing cabinet with a little reinforcement.

How do you cut out a void extrusion in Revit?

Solution:

1. Edit the in place wall.
2. Create a new void extrusion that will define the opening.
3. Use the “Cut” tool and select the void geometry.
4. Finish the solid edition.

How do you insert a curtain wall in Revit?

You can embed a wall into another wall, a wall into a curtain wall, or a curtain wall into a wall.

1. Sketch a host wall of any type in the drawing area. …
2. Sketch a wall that will be embedded into the host wall. …
3. Click Modify | Place Wall tab Geometry panel Cut. …
4. Select the host wall.

How do I use the Cut tool in Revit?

Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.