How do you make CATIA pockets?

How do you make multiple pockets in Catia?

Creating a Multi-Pocket

1. Click Multi-Pocket .
2. Select Sketch. 4 that contains the profiles to be extruded. …
3. Select Extrusion domain. 1 from the dialog box. …
4. Specify the length by entering a value. For example, enter 10mm. …
5. You need to repeat the operation for each extrusion domain by entering the value of your choice.

How do you use the pocket surface in Catia?

Creating Pads or Pockets from Surfaces

1. Select Extrude. 1 as the surface to be extruded. The different surfaces you can select are: …
2. Click Pad . The Pad Definition dialog box appears. You need to define an extrusion direction. …
3. Click the Reference field and select Plane. 1 as the plane defining the extrusion direction.

Is it possible to create pocket or groove as first features in Catia?

Yes, using the MULTIPAD option OR using simple PAD and in simple PAD select GOTO PROFILE option. 7) What is DRAFTED FILLETTED POCKET? It performs drafting, pocket& filleting simultaneously.

Is it possible to create pocket as first features?

If your insert a new body and create a pocket as the first feature of this body, the application creates material: Pockets can also be created from sketches including several profiles. These profiles must not intersect.

How do you make a shaft in Catia?

Open the Revolution. CATPart document and make sure that PartBody is set as current. Select Sketch.
…
An open profile (not even closed by the revolution axis) cannot be be used as the first feature in a body.

1. Click Shaft . …
2. Click OK to close the warning message and display the Shaft Definition dialog box.

Who is the developer of Catia?

CATIA

How do you use the rib command in Catia?

CATPart document.

1. Click Rib . The Rib Definition dialog box is displayed.
2. Select the profile you wish to sweep, i.e. Sketch . 2 . …
3. Select the center curve, i.e. Sketch. 1 . …
4. To go on with our scenario, maintain Keep angle. …
5. Click OK .

Can we redefine the sketches?

Answer : Right click on the sketch whose reference plane is to be changed and select the change reference plane and then select new reference. Question 31.

Can you hide a specification tree?

Is it possible to hide specification tree? Yes, with help of F3 button, but the option in Tools command must be checked to allow this.

What is part Modelling in Catia?

Overview: The Part Design course is designed to teach you the fundamentals of the CATIA V5 R21 Part Design workbench. Modeling techniques used to create and edit designs and feature-based solids are explored. Course topics include sketch-based features, dress up features, and patterns.

Can you create a pad using Open profile?

The application allows you to create pads from open profiles provided existing geometry can trim the pads.