How do you make a slotted hole in Solidworks?

How do you use slots in SolidWorks?

To access the slot tools:

1. Sketch tab. Click the Slot CommandManager, to select slot tools from the Slot flyout tool.
2. Menu. Click Tools > Sketch Entities to select slot tools.
3. Slot PropertyManager. Change slot tools in the Slot PropertyManager.

How do you make an advanced hole in SolidWorks?

Click Advanced Hole (Features toolbar) or Insert > Features > Advanced Hole.

How do I make threaded holes in SolidWorks?

Start by creating a cylindrical extrusion or cylindrical hole, much like the initial steps to of making a cosmetic thread. The feature size should be the same as the nominal thread diameter. From there, select the starting edge. Then, click “Insert” then “Feature” and “Thread.” This will automatically create a thread.

How do you create a hole wizard in SolidWorks?

To create your own Hole Wizard standards:

1. Click Options on the Standard toolbar, or click Tools > Options.
2. On the System Options tab, click Hole Wizard/Toolbox.
3. Browse to the Hole Wizard and Toolbox folder location. …
4. Click Configure.
5. In the Toolbox configuration tool, set options on the Smart Fasteners page.

How do you label countersunk holes?

Write the dimensions of the countersink, giving first the diameter of the drill hole, then the angle of the countersink, followed by the diameter symbol and the diameter of the larger hole. This dimension can be given either with a diameter symbol first, or with the word DRILL after the first diameter.

How do you make a chamfer hole in Solidworks?

Click Chamfer (Features toolbar) or Insert > Features > Chamfer.

…

In the PropertyManager:

1. Under Chamfer Type, click Offset Face .
2. Select Full preview.
3. Select Partial Edge Parameters.
4. In Start condition, select Distance offset.
5. Set Offset distance from start point to 20 mm.
6. In End condition, select Distance offset.

What is screw clearance?

A clearance hole is a hole that exists within a material that is large enough to allow a bolt or the thread of a screw to pass through, but small enough to prevent the screws or bolts head to pass through.

How do you make a tab and slot in Solidworks?

To create a tab and slot:

1. In a part, click Tab and Slot (Sheet Metal toolbar) or Insert > Sheet Metal > Tab and Slot.
2. In the PropertyManager, specify options.
3. In the graphics area, select an edge for the tabs and a corresponding face for the slots. …
4. Click .

How do you make a slot mate in Solidworks?

To create a slot mate:

1. Click Mate (Assembly toolbar) or Insert > Mate.
2. In the PropertyManager, expand Mechanical Mates and select Slot .
3. For Mate Selections, select a slot face and the feature to mate to it: The face of another straight or angular slot. An axis. …
4. Select a constraint option: Option. Description. …
5. Click .

How do you make multiple holes in Solidworks?

In the PropertyManager, select the Positions tab. You can select multiple points or use a sketch to create multiple holes. If you forget to select the Positions tab and click , the software prompts you to select a point on the face to locate the hole.

How do you use the hole feature on Onshape?

Hole

1. Create a sketch with sketch points.
2. Select the points where you want to create holes, then click . You can click the. in order to select inferred Mate connectors as points instead of sketch points. …
3. Select a hole style: Simple (a uniform-diameter drilled hole) Counterbore.

How do I get my solidworks toolbar back?

To display SOLIDWORKS toolbars:

1. Right-click in the window border and select or clear a toolbar name.
2. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.