How do you fix a part in Solidworks?

What does fix do in Solidworks?

It is recommended that at least one assembly component is either fixed, or mated to the assembly planes or origin. This gives a frame of reference for all other mates, and helps prevent unexpected movement of components when mates are added. A fixed component has a (f) before its name in the FeatureManager design tree.

How do I anchor a part in Solidworks?

To set the anchor points:

1. Expand Sheet Format for the sheet in the FeatureManager design tree.
2. Right-click one of the anchors, select Set Anchor, then click where you want the anchor point on the sheet. When you set the anchor point from the FeatureManager design tree, you are automatically in Edit Sheet Format mode.

How do I fix origin in Solidworks?

Click Tools > Sketch Tools > Align > Align Grid/Origin. In the Align Grid/Origin PropertyManager, under Selections: To change only the sketch origin: Select a vertex or point for Sketch Origin Location .

How do you lock a part in space in Solidworks?

Locking and Breaking External References

1. In the FeatureManager design tree: For an individual item, right-click the feature, component, body, or part. …
2. Click External References. …
3. To modify external references, select the external references and click Break Selected, Lock Selected, or Unlock Selected. …
4. Click OK.

How do you fix mates in Solidworks?

Try these actions, which sometimes fix the problem:

1. Drag a component to snap it into place.
2. Suppress and unsuppress the affected mates.
3. If the components are far from their correct positions, suppress some of their mates, move the components closer to their correct positions, then unsuppress the mates.

What does fixing a component do in an assembly?

It is recommended that at least one assembly component is either fixed, or mated to the assembly planes or origin. This gives a frame of reference for all other mates, and helps prevent unexpected movement of components when mates are added. A fixed component has a (f) before its name in the FeatureManager design tree.

How do you fix a table in Solidworks?

It is much easier to:

1. Right-click a table anchor in the tree.
2. Select Set Anchor. You will now automatically enter Edit Sheet Format mode.
3. Click to define the new position of the anchor.
4. Once you click, SOLIDWORKS stores the new position and you exit Edit Sheet Format mode.
5. Save your change via File > Save Sheet Format.

How do you anchor a table in Solidworks?

To set a table anchor point:

1. In the FeatureManager design tree, expand Sheet Format. for the active drawing sheet.
2. Right-click the anchor you want to set and select Set Anchor. Choose from: General Table Anchor. Revision Table Anchor. Bill of Materials Anchor. …
3. Click in the graphics area to specify the anchor point.

How do I add a point to a drawing in Solidworks?

To create sketch points: Click Point (Sketch toolbar) or Tools > Sketch Entities > Point. Click in the graphics area to place the point. The Point tool remains active so you can continue to insert points.

How do you ground a part in SolidWorks assembly?

To define a ground plane:

1. In an assembly, click Insert > Reference Geometry > Ground Plane.
2. In the PropertyManager, in Ground Plane, select a face in the assembly.
3. (Optional.) Click Reverse Direction , or click the handle in the graphics area.
4. Click . Ground Plane appears in the FeatureManager design tree.

How do you center a sketch in SolidWorks?

Sketching Center Rectangles

1. Click Center Rectangle .
2. In the graphics area: Click to define the center. Drag to sketch the rectangle with centerlines. Release to set the four edges.
3. Click . Video: Sketching Center Rectangles.

How do you lock two parts together in Solidworks?

Now to lock any part in Solidworks assembly all you have to do is:

1. choose the part from the FeatureManager Design tree.
2. right click on the name of the part.
3. Select Fix ( To fix the part), Float (To make the part move)

What is a lock mate?

A Lock mate maintains the position and orientation between two components. The components are fully constrained relative to each other. A Lock mate has the same effect as forming a subassembly between the two components and making the subassembly rigid. Parent topicStandard Mates.