How do you Extrude the boss in assembly in Solidworks?

Can you extrude in assembly solidworks?

You can create extruded and revolved cut features in assemblies. To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut.

How do you sketch a part in assembly in Solidworks?

To create a layout:

1. Open a new assembly.
2. In the Begin Assembly PropertyManager, click Create Layout. A 3D sketch opens, and Layout appears in the FeatureManager design tree.
3. Create sketch entities and group related entities into blocks.
4. Close the blocks and the sketch.

How do you extrude both sides in Solidworks?

To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature. When you drag the manipulator to set the size, an Instant3D ruler appears so you can set precise values.

How do you move a boss extrude in Solidworks?

To move, copy, rotate, or mate a solid or surface body:

1. Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy. …
2. Click Translate/Rotate or Constraints at the bottom of the PropertyManager (if necessary) to switch to the page you want.
3. Set options in the PropertyManager.

Can I extrude in an assembly?

You can create extruded and revolved cut features in assemblies. To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut.

How do you extrude Assembly in Inventor?

Click 3D Model tab Create panel Extrude . If there is only one profile in the sketch, it is selected automatically. Otherwise, select a sketch profile. Select the face, work plane, or surface from which to start the extrusion.

How do you pull a part out of a Solidworks assembly?

To specify the export options: Click Tools > Options > System Options > Export. For File Format, select SLDPRT from assembly.

How do I transfer assembly to sketch to part?

Answer. In the assembly, edit the profile of the sketch. While in the profile, perform a Ctrl + A (Select All), then a Ctrl + C (Copy). In the part file, go to the Sketch command and select the desired reference plane that you want the sketch to be on.

How do I convert solidworks to assembly?

To save a part as an assembly and create instance counts from similar bodies:

1. Click Insert > Features > Save Bodies.
2. In the Save Bodies PropertyManager, under Create Assembly, select Derive resulting parts from similar bodies or cut list.

How do you extrude boss bases?

Extrude PropertyManager

1. Create a sketch.
2. Click one of the extrude tools: Extruded Boss/Base. on the Features toolbar, or click Insert > Boss/Base > Extrude. Extruded Cut. on the Features toolbar, or click Insert > Cut > Extrude. Extruded Surface. on the Surfaces toolbar, or click Insert > Surface > Extrude.

How do you extrude a boss?

You can also go to the toolbar and click Insert -> Boss/Base -> Extrude to pull up the Boss-Extrude Feature menu as well. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create a 3D model from.

What is extrude boss base feature and define its different options?

One of the oldest commands in the SOLIDWORKS software is the boss/base extrude command. An Extruded Boss/Base feature will allow you to take a 2D sketch and add thickness to it in the third dimension. Every few releases, this feature gets some terrific functionality added to it.

How do you move extrude?

Boss Extrude can be move by two methods.

…

1. Select the Boss Extrude from feature tree.
2. Right click on it and select edit sketch.
3. Now, edit the sketch as per your requirement.
4. Close the sketch. Remove unwanted lines, arcs and splines carefully.
5. Exit the sketch.
6. Boss extrude is automatically updated.