How do you create a flange in Solidworks?

How do I edit flange in SolidWorks?

To edit the profile sketch: Do one of the following: When editing an edge flange feature, click Edit Flange Profile under Flange Parameters. When editing a cross break, click Edit Cross Profile under Cross Break Parameters.

Can you create a sheet metal flange using a curved edge?

Now with SOLIDWORKS 2021, you can add curved edge flanges to edge flanges created off a planar base and on nonlinear or circular edges of nonplanar faces. That’s verbatim from the help file. What it really means is that now you can added flanges to anything you can come up with for your sheet metal design.

How do you use a swept flange?

Creating Swept Flanges

1. Sketch an open, non-intersecting profile on a plane or face.
2. Create a path for the profile to follow. You can use a sketch or a series of existing sheet metal edges. …
3. Click Swept Flange. …
4. In the graphics area: …
5. Set options in the PropertyManager, then click .

How do you round edges in Solidworks?

To use the Round Sharp Edges option, right-click the appearance in the Display Manager and click Edit Appearance. In the PropertyManager, on the Illumination tab, select Round Sharp Edges and set a value for the radius.

What is Mitre flange?

A miter flange feature adds a series of flanges to one or more edges of a sheet metal part. The sketch for a miter flange must adhere to the following requirements: The sketch can contain lines or arcs. If you use an arc to create a miter flange, the arc cannot be tangent to the thickness edge.

How do you make a sketched bend in Solidworks?

To create a sketched bend feature:

1. Sketch a line on a planar face of the sheet metal part. …
2. Click Sketched Bend. …
3. In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
4. Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .

What is a flange used for?

Flanges are helpful to connect pumps, valves, pipes, and other parts to form a piping system. Flanges are typically welded or thread screwed to connect. The use of flanges allows a person for maintenance and easy repair of the pipe system.

What is sheet metal flange?

A flange feature consists of a face and bend connected to an existing face along a straight edge. To add a flange feature, you select one or more edges, and specify the size and position of the material added.

How do you get the sheet metal tab in Solidworks?

To create a tab feature in a sheet metal part:

1. Create a sketch on a plane or planar face that meets the sheet metal tab requirements.
2. Click Base Flange/Tab. on the Sheet Metal toolbar, or click Insert > Sheet Metal > Base Flange . The tab is added to the sheet metal part.