How do I use the draft tool in Solidworks?

How do I draft a part in Solidworks?

Parting Line Draft

1. Sketch the part to be drafted.
2. Insert a split line curve, if desired.
3. Click Draft on the Features toolbar or click Insert > Features > Draft.
4. Under Type of Draft, select Parting Line. …
5. Under Draft Angle, enter the Draft angle .

How do you use draft command?

Basic Draft

1. Click the Draft Angle icon . …
2. Check the Selection by neutral face option to determine the selection mode.
3. Select the upper face as the neutral element. …
4. The default angle value is 5. …
5. Click Preview to see the draft to be created. …
6. Click the More button to access additional options.

What does the draft tool do?

Apply a taper to one or more selected faces, or a parting line, in order to facilitate pulling a part from a mold. Apply a taper to one or more selected faces, or a parting line, in order to facilitate pulling a part from a mold.

What is step draft?

A step draft is a variation of a parting line draft. The step draft creates one face rotated about the plane used as the Direction of Pull. This results in small faces, representing the steps (highlighted in blue in the example below).

How do you use the fillet tool in Solidworks?

To create fillets:

1. Click Fillet on the Features toolbar, or click Insert, Features, Fillet/Round.
2. Set the PropertyManager options. For constant radius fillets only, you can use the FilletXpert to add or modify fillets and to manage fillet corners.
3. Click OK .

How do you change the draft angle in Solidworks?

Changing Draft Using DraftXpert

1. In the DraftXpert PropertyManager, select the Change tab.
2. Under Drafts to Change, select the draft items to modify for Faces to Draft . …
3. Set a value for Draft Angle and click Change to modify the draft for the selected faces.

What is neutral plane in Solidworks?

You can create a feature that tapers selected model faces by a specified angle, using a Neutral Plane to determine the direction of pull for creating molds. You can also use the DraftXpert to create, change, or remove neutral plane drafts.

How do I use draft feature in Catia?

Click Draft Angle . The Draft Definition dialog box is displayed and an arrow appears on a plane, indicating the default pulling direction. The constant angle draft option is activated. If you click the icon to the right , you then access the command for creating variable angle drafts.

How do I use the draft tool in Inventor?

Create a Parting Line Face Draft

1. On the ribbon, click 3D Model tab Modify panel Draft .
2. Click the Parting Line draft type .
3. Define the pull direction . …
4. Select the Parting Tool. …
5. Select the faces to draft. …
6. To maintain adjacent blended features, such as fillets, use Automatic Blending. …
7. Enter the draft angle .

How do I add a taper in Solidworks?

To extrude an entity with a taper angle:

1. Click Solids > Draw > Extrude (or type Extrude).
2. Specify the type of entities to create. Surface. …
3. Specify the entities to extrude and press Enter.
4. Specify the Taper angle option.
5. Specify the taper angle and press Enter.
6. Specify the extrusion height.