How do I make a solid assembly SolidWorks?

How do you make solid part assembly in Solidworks?

To create a part within an assembly: Click New Part (Assembly toolbar) or Insert > Component > New Part. For externally saved parts, type a name for the new part in the Save As dialog box and click Save.

How do I assemble an assembly in Solidworks?

Do one of the following:

1. Right-click one of the selected components, and select Form New Subassembly.
2. Click Insert > Component > Assembly from [Selected] Components. To form a subassembly from components contained in a folder in the FeatureManager design tree, right-click the folder and click Form New Subassembly.

How do you create an assembly?

To create an assembly in the drawing by inserting an assembly from a tool palette

1. To display the Tool Palettes window: Click Home tab Palettes panel .
2. Open the tool palette containing the desired assembly.
3. On the tool palette, click the assembly, and then click a location in the drawing. Press Enter to end the command.

What does fully defined mean in Solidworks?

Fully defines the sketch by applying combinations of relations and dimensions. Selected entities. Applies relations and dimensions only to specific sketch entities that you select for Entities to Fully Define. Calculate. Analyzes the sketch and generates the appropriate relations and dimensions.

Why isn’t my sketch fully defined in Solidworks?

However if you create Sketch Patterns for simple geometry, you may have noticed that it doesn’t fully define the instances, even if you opt to Add Dimensions. In this tech tip we’ll answer the common question: Why is my SOLIDWORKS Sketch Pattern Under Defined? The reason is because the sketch instances can rotate.

What is a fully defined sketch in Solidworks?

The Fully Define Sketch tool calculates which dimensions and relations are required to fully define under defined sketches or selected sketch entities. You can access Fully Define Sketch at any point and with any combination of dimensions and relations already added.

How do you make assemblies flexible in Solidworks?

To make a subassembly flexible: Click a subassembly in the FeatureManager design tree and select Component Properties . In the dialog box, under Solve as, select Flexible, then click OK.

What is a flexible assembly solidworks?

By default, when you create a subassembly, it is rigid. Within the parent assembly, the subassembly acts as a single unit and its components do not move relative to each other. However, you can make subassemblies flexible. This allows movement of the individual components of a subassembly within the parent assembly.

How do I make my sub assembly flexible?

To make a subassembly flexible:

1. Click a subassembly in the FeatureManager design tree and select Component Properties .
2. In the dialog box, under Solve as, select Flexible, then click OK. Flexible is not available for lightweight subassemblies.

How do you create assembly in CAD?

In the Write Block dialog box, select Objects. Click Select Objects. In the drawing, select the objects that make up the assembly.

…

To create and use assemblies

1. In the Name list, click the assembly you just created, or click Browse to locate the drawing.
2. In the lower-left corner, select Explode.
3. Click OK.

How do I create a Civil 3D assembly?

Click Home tab >> Create Design panel >> Assembly drop-down >> Create Assembly . In the Create Assembly dialog box, for name, enter Primary Road Full Section. Click OK. When the ‘Specify assembly baseline location’ prompt is displayed on the command line, click in the rectangle under the profile views.

How do I create a custom assembly in Civil 3D?

To create a subassembly from a polyline

1. Create the desired polyline shape in the drawing.
2. Click Home tab Create Design panel Create Subassembly From Polyline Find.
3. Click the polyline object in the drawing and press Enter.
4. In the Create Assembly dialog box, for Name, enter a name for the subassembly.