How do I import features into SOLIDWORKS?

What can you import into Solidworks?

You can distribute drawings and assemblies files to be viewed with the eDrawings Viewer. Import diagnostics repairs faulty surfaces, knits repaired surfaces into closed bodies, and makes closed bodies into solids. Import Diagnostics repairs imported models. You can export part and assembly files to STL (.

Can you edit a parasolid in Solidworks?

You can edit only features that were created from an ACIS, Autodesk Inventor, IGES, Parasolid, Pro/ENGINEER, Solid Edge, STEP, VDAFS, or VRML file.

How do I run an import diagnostic in Solidworks?

To initiate Import Diagnostics:

  1. When you import a model with faults, a message asks if you want to run Import Diagnostics. Click Yes.
  2. With a model open, click Import Diagnostics (Tools toolbar) or Tools > Evaluate > Import Diagnostics. The Import Diagnostics PropertyManager opens.

How do I edit a feature in Solidworks?

To edit the definition of a feature:

  1. Do one of the following: Select a feature in the FeatureManager design tree or the graphics area. Click Edit > Definition. …
  2. Edit the definition in the dialog box by specifying new values or options.
  3. Click OK to accept the changes.
IT IS INTERESTING:  What is InfraWorks LT?

What type of CAD files could be imported into SOLIDWORKS?

Below is the full list of file types SOLIDWORKS is able to import.

  • Drawing Exchange Format (.dxf)
  • Drawing (.dwg)
  • Adobe Photoshop (.psd)
  • Adobe Illustrator (.ai)
  • Parasolid (.x_t)
  • STEP (.stp)
  • ACIS (.sat)
  • IGES (.igs, .iges)

Where is import command in SOLIDWORKS?

In a part document, click Imported Geometry on the Features toolbar, or click Insert > Features > Imported. The Open dialog box appears. Browse to the desired file, and click Open. For ACIS, IGES, STEP, STL, VDAFS, or VRML files, you can click Options to set the import options.

How do I change imported mesh in SOLIDWORKS?

To edit meshes:

  1. Do one of the following: Click Mesh Edit. scanTo3D toolbar). Click Tools > ScanTo3D > Mesh Edit. …
  2. In the PropertyManager: Select a Manipulation Method. Set the options. For the Translate and Rotate options, you can set values manually or use the triad to set them.
  3. Click .

How do I edit a stock part in SOLIDWORKS?

Open a derived part, right-click, and select Edit Feature. The software checks for all bodies defined by the split feature in the stock part, and copies the bodies into the derived part for previewing. The currently associated body highlights in the graphics area. Set the PropertyManager options and click .

How do I run feature recognition in Solidworks?

(Features toolbar) or Insert > FeatureWorks > Recognize Features. You can also select an imported body in the graphics area or in the SOLIDWORKS FeatureManager design tree, right-click, and select FeatureWorks > Recognize Features. This works for automatic and interactive recognition.

IT IS INTERESTING:  Best answer: How do I change point elevation in Civil 3D?

How do I repair surfaces in Solidworks?

To repair a model:

  1. Click Attempt to Heal All.
  2. If faults remain, repair faulty faces first. Right-click a face in the list and select from the menu.
  3. Repair gaps last. Right-click a gap in the list and select from the menu.
  4. When all repairs are complete, click .

To break the link from the original part file:

  1. In the FeatureManager design tree, right-click the inserted third-party native CAD file and click Break Link.
  2. In the dialog box, click one of the following: Yes, break the link (cannot be undone) . Breaks the link of the inserted part file from the original file.

How do I get a direct editing tab in Solidworks?

The Direct Editing toolbar, visible in Figure 1 below, can be enabled by right clicking an existing tab of the SOLIDWORKS command manager (such as the Features tab) and choosing “Direct Editing.”

How do I edit a solid in Solidworks?

Editing Imported Features

  1. In the FeatureManager design tree, right-click the feature created from the imported document, and select Edit Feature. …
  2. In the Files of type list, select the desired format.
  3. Browse to select the desired file to import. …
  4. Select the Match faces and edges check box, if desired. …
  5. Click Open.

How do you change dimensions in Solidworks?

To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel , mouse wheel, or by typing in the dimension box.

Special Project