How do I cut a circle in Revit?

Load the family into the project and place it. Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.

How do you create holes in Revit?

To place holes

1. Click Steel tab Fabrication Elements panel (Holes).
2. Select the element face to which the hole pattern will be perpendicular.
3. Click Modify | Create Hole Pattern tab Draw panel and select either: …
4. Sketch the shape of the hole pattern on the element face.

How do you create a void cut in Revit?

Create negative geometry (voids) to cut solid geometry with the Create Void tool.

1. On the Create tab Draw panel, select one of the drawing tools.
2. Click in the drawing area, and draw a closed loop that intersects solid geometry.
3. Select the closed loop.
4. Click Modify | Lines tab Form panel Create Form drop-down (Void Form).

How do you split objects in Revit?

Split Elements

1. Click Modify tab Modify panel (Split Element).
2. If desired, on the Options Bar, select Delete Inner Segment. When you select this option, Revit removes the segment of the wall or line between selected points.
3. Click the element at the point you wish to split.

How do you cut in Revit 2020?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the object to be cut. Select the instance with which to cut.

Where is Geometry in Revit?

On the Modify ribbon, in the Geometry panel, click Join Geometry. Revit prompts you to select the solid geometry to be joined. Select the floor and then the wall on the left.

How do I create a slab opening in Revit?

Add an Opening in a Structural Floor

1. On the ribbon, click Opening By Face. Where is it? …
2. Select a structural floor.
3. Using the sketch tools on the Modify | Create Opening Boundary tab Draw panel, sketch the structural floor opening.
4. When finished, click Modify | Create Opening Boundary tab Mode panel Finish Edit Mode.

How do you select a floor in Revit?

In a plan view, select the floor, and click Modify | Floors tab Mode panel Edit Boundary. Watch the tooltip and the status bar to be sure you select the floor, not another element. If desired, you can use a filter to select the floor.

How do you use voids in Revit?

Create negative geometry (voids) to cut solid geometry with the Create Void tool.

1. On the Create tab Draw panel, select one of the drawing tools.
2. Click in the drawing area, and draw a closed loop that intersects solid geometry.
3. Select the closed loop.
4. Click Modify | Lines tab Form panel Create Form drop-down (Void Form).

How do you cut a beam in Revit?

Click Modify tab Geometry panel Cut drop-down (Cut Geometry). Select the beam to be cut. Select the reference plane. If you move the wall or the beam, the cut will persist at the wall unless the beam is no longer joined with the wall.

How do you split a line into equal parts in Revit?

To divide a line into equal segments



Draw or pick a line. On the Toolbar, click the Split icon. Split the line into the number of segments required (they do not need to be equally spaced at this point).

How do you exclude a section in Revit?

To exclude a part from the model

1. Select the part.
2. Click Modify | Parts tab Exclude panel (Exclude Parts).

How do I remove a split line in Revit?

Click Modify | Floors tab Shape Editing panel Modify Sub Elements. Click on the shape edit element to select it. Press Delete . Note: If you delete a split line or a support, its start and end points remain visible, and fold lines may still display.