How do I create a cam path in SolidWorks?

How do I create a cam profile in Solidworks?

Creating Cams

1. Click Cams (Toolbox toolbar) or Toolbox > Cams .
2. In the Cam dialog box, on the Setup tab, for Cam Type, select Circular or Linear and set property values for the cam type you selected. …
3. On the Motion tab, create at least one cam motion definition.
4. On the Creation tab, set creation properties.
5. Click Create.

How do you create a follower and cam in Solidworks?

To add a cam-follower mate:

1. Click Mate (Assembly toolbar) or Insert > Mate.
2. In the PropertyManager, under Mechanical Mates, click Cam .
3. Under Mate Selections, for Entities to Mate , select a face on the cam. …
4. Click in Cam follower and select a face or vertex on the cam follower.

How do you make a part follow a path in Solidworks?

Allows you to drag the component along the path. Constrains the vertex to a specified distance from the end of the path. Enter the distance.

…

Path Mate.

What is cam profile?

[′kam ‚prō‚fīl] (design engineering) The shape of the contoured cam surface by means of which motion is communicated to the follower. Also known as pitch line.

What is cam follower mechanism?

A cam and follower mechanism is a profiled shape mounted on a shaft that causes a lever or follower to move. Cams are used to convert rotary to linear (reciprocating) motion. As the cam rotates, the follower rises and falls in a process known as reciprocating motion.

How do you use mechanical mates in Solidworks?

To set up the mate, you simply need to select a linear edge or line on the rack component, and then a cylindrical face or circular edge on the pinion component. The mate will then relate the motion based on either the pinion pitch diameter or the rack travel distance.

How do you mate slots in Solidworks?

Slot Mates

1. Click Mate (Assembly toolbar) or Insert > Mate.
2. In the PropertyManager, expand Mechanical Mates and select Slot .
3. For Mate Selections, select a slot face and the feature to mate to it: The face of another straight or angular slot. An axis. …
4. Select a constraint option: Option. Description. …
5. Click .

How do you make a sweep in Solidworks?

To create a sweep: Sketch a closed, non-intersecting profile on a plane or a face.

…

Click one of the following:

1. Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep.
2. Swept Cut on the Features toolbar or Insert > Cut > Sweep.
3. Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.