How do I change the material of a part in Catia?

How do I edit part of Catia?

Open the Edit1. CATPart document. Double-click the draft to be edited (in the specification tree or in the geometry area).

…

command which will display the edit dialog box.

1. Enter a new draft angle value.
2. Click OK . …
3. Now, double-click the pad. …
4. Enter a new length value.
5. Uncheck the Mirrored extent option.

How do I apply different materials to the same object in Catia?

You can apply different materials to different instances of a same CATPart.

…

To visualize the applied material, click Shading with Material in the View toolbar.

1. Select the element onto which the material is to be applied. …
2. Click Apply Material . …
3. Select a material from any family, by a simple click.

Which command is used in Catia to add materials to the object?

It is Like revolve command in other CAD software, the SHAFT command is mostly used to make shaft like parts. It requires an axis, around which the sketch will be revolved. This command which is usually known as SWEEP is called RIB IN CATIA. It adds material along a guide curve.

How do you apply textures in Catia?

Select Edit > Properties (or use one of the other methods detailed in About Material Properties) to open the Properties dialog box. Click the Texture tab in the Properties dialog box: In the Image Name box, navigate to locate the desired image, and click OK to map it onto the preview element as the texture.

How do I move a particular body in Catia?

Reordering Elements Inside of Bodies: Command-based (Right Click Menus) Finally, you can move Geometrical Sets using commands. To do this, select the Geoset or object, right click, and select “ *. object > Change Geometrical Set ”.

How do I add a new material in Catia?

Creating User Materials

1. Click User Material in the Model Manager toolbar. …
2. Choose the desired material in the Library dialog box. …
3. Click OK in the Library dialog box. …
4. Double-click the User Material. …
5. Select the Analysis tab in the Properties dialog box. …
6. Modify the parameters if needed.

How do I apply materials in Catia v6?

2 Answers. Just select the material and the click apply material command…. select the material you want to apply and then click apply then ok….

How do you change material in CAD?

Apply a Material From the Materials Browser

1. Click Visualize tab Materials panel Materials Browser. Find.
2. Select the objects which you want to assign the material.
3. In the Materials Browser, right-click the material to assign and choose Assign to Selection. The material is assigned to the objects.

What is pocket in CATIA?

Creating a pocket consists in extruding a profile or a surface and removing the material resulting from the extrusion. The application lets you choose the limits of creation as well as the direction of extrusion. The limits you can use are the same as those available for creating pads.