How do I change the cut plane in Revit?

How do you change the cut plane in a view range in Revit?

Establish or change the horizontal planes that control an object’s visibility in plan views.

1. Open a plan view.
2. On the Properties palette, locate the View Range parameter, and click Edit. …
3. In the View Range dialog, modify view range properties as necessary. …
4. Click Apply to view changes.

How do you change the cut height of a plan in Revit?

Go to the floor plan view and click in the View Range menu in the instance properties. In a Floor Plan view, the key parameters are Cut plane and Bottom. Set a level and a height offset for each of these parameter.

Where is the cut plane in Revit?

The cut plane is located between the top and bottom planes, and it is the dividing line that determines how elements are displayed in the view. The additional plane beyond the primary range is the View Depth.

How do you adjust a cut plane?

Answer

1. Open a plan view.
2. In the Create panel on the View ribbon, expand the Plan Views split button and click Plan Region.
3. Sketch a closed loop using lines, rectangles, or polygons.
4. In the Properties palette, click Edit.
5. In the View Range dialog box, specify the primary range and view depth for the plan region.

How do I change the elevation view range in Revit?

You can resize the viewing area of an elevation by resizing the clip planes.

1. In a plan view, select the elevation tag arrowhead. The clip planes for the elevation display in the drawing area. Example. …
2. Drag the blue dots or the arrows to resize the clip plane.

How does cut plane work in Revit?

The cut plane is a plane that determines the height at which certain elements in the view are shown as cut. These 3 planes define the primary range of the view range. View depth is an additional plane beyond the primary range. Change the view depth to show elements below the bottom clip plane.

How do you cut stairs in Revit?

Select the stair in the drawing area. On the Properties palette, click (Edit Type). In the Type Properties dialog (for the stair type), under Graphics, for Cut Mark Type, click the value, and click the browse button.

How do you use plan regions in Revit?

Create a Plan Region

1. Open a plan view.
2. Click View tab Create panel Plan Views drop-down (Plan Region).
3. Sketch a closed loop using lines, rectangles, or polygons.
4. On the Properties palette, for View Range, click Edit.
5. In the View Range dialog, specify the primary range and view depth.

How do you denote stairs in plan?

Stairs Down



Stairs going down are seen from above, so all the steps are in continuous lines. To indicate the direction of the stairway, we have to write DN at the beginning of the stairs. An arrow follows the direction down to the last visible step.

How do you cut a view in Revit?

Create a Section View

1. Open a plan, section, elevation, or detail view.
2. Click View tab Create panel (Section).
3. (Optional) In the Type Selector, select a view type from the list, or click Edit Type to modify an existing view type or create a new view type.

How do you crop in Revit?

Crop a View

1. If the view is not cropped, On the View Control Bar, click (Crop View).
2. If the view is cropped, but the crop region is not visible, click (Show Crop Region) on the View Control Bar.
3. Resize the crop region as necessary by using the drag control or setting the size explicitly.

How do I change the view in Revit?

Modify a View on a Sheet

1. Open the sheet.
2. In the drawing area, select a view on the sheet. …
3. Click Modify | Viewports tab Viewport panel (Activate View). …
4. Modify the view as desired. …
5. To deactivate the view on the sheet, double-click outside of the view, or right-click, and click Deactivate View.