Frequent question: What is a detail view in Solidworks?

What is a detail view used for?

A detail view is used to clarify specific areas of a drawing. Usually, an area is enlarged so that small details are easier to see.

Where is detail view in Solidworks?

(Drawing toolbar), or click Insert > Drawing View > Detail.

What are the different views in Solidworks?

You can generate drawings of a part or assembly in a variety of view types: Standard 3 View, Model, and Relative views. The part or assembly document must be saved before you can create drawing views of it.

What are the three views in Solidworks?

The Standard 3 View option under Insert > Drawing View creates three related default orthographic (front, right, left, top, bottom, and back) views of a part or assembly displayed at the same time. The view orientations used are based on the orientations (Front, Right, and Top) in the part or assembly.

What is the difference between section and detail?

Section cuts through small portions of construction or objects, for example, are often referred to as details. But details are not always drawn in section. They may also include enlarged portions of the floor plan or elevation.

IT IS INTERESTING:  Can you put multiple assemblies together in Solidworks?

How do you create a detail view?

Creating a Detail View / Detail View Profile

  1. In the Drawing window, click Detail View in the Views toolbar ( Details sub-toolbar). …
  2. Click the callout center. …
  3. Drag to select the callout radius and click a point to end the selection. …
  4. Click to generate the detail view.

How do I delete detail view in Solidworks?

Deleting Views

  1. Right-click anywhere in a drawing view and select Delete.
  2. Click Yes to confirm the deletion. If you delete a detail or section view, select Delete detail sketch or Delete section sketch so the sketch used to create the view is also deleted.

How do you move a detail view in Solidworks?

Modifying a Detail View

  1. Right-click the profile sketch and select Edit Sketch.
  2. Edit the profile as needed to change the shape or size.
  3. Click Rebuild to update the detail view.

How do you dimension a detail view in Solidworks?

Once the dimension is imported into the Section View, expand the Detail View circle to see the entire diameter, then hold Shift and drag the dimension to the Detail View. With this dimension moved, you can resize the Detail View circle and the dimension will automatically be foreshortened.

What are different views in engineering drawing?

The most common way to communicate all the information is by using three different views in a multiview drawing: Front view. Top view. Side view.

What does 1 typ mean in Solidworks?

TYP means ‘Other features share the same characteristic. For example, if the drawing shows 8 holes on a bolt circle, and just one is dimensioned, with “TYP” or “(TYP)” following the dimension label, it means that that hole is typical of all 8 holes; in other words, it means that the other 7 holes are that size also.

IT IS INTERESTING:  How do I delete a proposal in InfraWorks?

How do you make a drawing view in SOLIDWORKS?

To insert a model view into a drawing:

  1. Click Model View. (Drawing toolbar) or Insert > Drawing View > Model.
  2. Set options in the Model View PropertyManager. …
  3. Click Next . …
  4. Set additional options in the Model View PropertyManager. …
  5. Click .

What are the standard three views in a drawing?

Standard views typically include the 3 principle views – front, top, right side. There are several methods for generating the standard drawing views.

Special Project