Frequent question: How do you scale a drawing in SolidWorks?

How do you scale in Solidworks?

Scaling a Part

1. In a part document, click Scale (Features toolbar) or Insert > Features > Scale .
2. Set options in the PropertyManager.
3. Click. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.

How do you change the scale of a drawing?

Task 1: Rescale a drawing, using the same unit



Start the scaling command with SC (or SCALE). Make a selection for the objects that need to be included in the scaling operation. Click in the drawing for the first point of the scaling base (base point). Type R to activate Reference scaling.

How do you scale a drawing to actual size?

To scale a drawing by hand, start by measuring the width and height of the object you’ll be scaling. Next, choose a ratio to resize your drawing, such as 2 to 1 to double the image in size. Then, multiply your measurements by the first number in your ratio to increase the size.

Can you scale a sketch in Solidworks?

(Sketch toolbar) or Tools > Sketch Tools > Scale. In the PropertyManager, under Entities to Scale, select sketch entities for Sketch item or annotations. , and then click in the graphics area to set the point to Scale about.

What is the formula for scale drawing?

So when you’re working with scale drawings: Find out what the scale on the drawing is. Measure the distance on the drawing using a ruler (or count the number of squares, if that’s an option). Multiply the distance you measure by the scale to give the distance in real life.

How do you scale a CAD drawing?

How to scale up in AutoCAD – Window select the object(s), type SCALE, and then specify a number larger than 1. Hit Enter. The size of the object(s) will SCALE UP by that scale factor.

How do you find the scale factor of a drawing?

For calculating the scale factor from an engineering drawing scale, only multiply the feet by 12.

…

For calculating scale factor out of architectural drawing scale:

1. Choose your scale. For example: 1/4” = 1”
2. Invert the fraction and multiply by 12 to get: 4/1 x 12 = 48.
3. Your scale factor is 48.

What does the scale 1/100 convert to?

A scale of 1 to 100 is indicated on a drawing using the code 1:100. This can be interpreted as follows: 1 centimetre (0.01 metre) measured with a ruler on the plan would need to be multiplied by 100 to give the actual size of 1 metre.

How do you find the scale ratio?

To find a scale factor between two similar figures, find two corresponding sides and write the ratio of the two sides. If you begin with the smaller figure, your scale factor will be less than one. If you begin with the larger figure, your scale factor will be greater than one.

How do I change the scale of a sketch in SOLIDWORKS?

You can change the scale of a drawing sheet by selecting a scale from a predefined list or specifying a custom scale. To change the scale of an existing drawing sheet: In the status bar, click Sheet Scale and click a scale. If there are annotations in the drawing sheet, specify options in the dialog box and click OK.

How do you scale print in SOLIDWORKS?

To print the whole drawing sheet:

1. Click File > Print. …
2. Under Document Printer, click Page Setup.
3. In the Page Setup dialog box, under Resolution and Scale, select Scale to fit to print the entire sheet on the page, or select Scale and type a value.
4. Click OK.
5. Click OK again to print the document.

How do I stretch a sketch in SOLIDWORKS?

Stretching Sketch Entities

1. Click Base point. and then click on the sketch to set a base point.
2. Drag to stretch the sketch entities. When you release, the entities stretch to that point and the PropertyManager closes.