Frequent question: How do you remove the draft angle in Solidworks?

How do I turn off draft analysis in Solidworks?

To edit the analysis parameters and settings: Click View > Modify > Draft Analysis. To turn off the analysis: Click Draft Analysis (View toolbar) or View > Display > Draft Analysis.

What is a draft angle in Solidworks?

Draft tapers faces using a specified angle to selected faces in the model. One application is to make a molded part easier to remove from the mold. You can insert a draft in an existing part or draft while extruding a feature.

What is neutral plane in draft?

You can create a feature that tapers selected model faces by a specified angle, using a Neutral Plane to determine the direction of pull for creating molds. You can also use the DraftXpert to create, change, or remove neutral plane drafts.

How do I turn off draft analysis?

To edit the analysis parameters and settings: Click View > Modify > Draft Analysis. To turn off the analysis: Click Draft Analysis (View toolbar) or View > Display > Draft Analysis.

What is draft in injection molding?

A draft angle is calculated as a degree measurement (or, less often, an inch or millimeter measurement) from the vertical axis of a mold, and it helps account for thermoplastic shrinkage, a practical reality of the injection molding process for most materials.

How do you change the draft angle in SolidWorks?

Changing Draft Using DraftXpert

1. In the DraftXpert PropertyManager, select the Change tab.
2. Under Drafts to Change, select the draft items to modify for Faces to Draft . …
3. Set a value for Draft Angle and click Change to modify the draft for the selected faces.

What is step draft?

A step draft is a variation of a parting line draft. The step draft creates one face rotated about the plane used as the Direction of Pull. This results in small faces, representing the steps (highlighted in blue in the example below).

How do I use draft tool in Solidworks?

To add a draft, select the Features tab and then Draft in the CommandManager. Using the Draft tool, simply select a reference plane (I chose the same plane that we used for the analysis) and then the faces to draft.

How is draft angle measured?

You can measure the draft angle of positions within a surface patch by holding down the Shift key. The draft angle is measured from the principle plane to the normal of the point on the surface under the cursor. Click the position on the surface to enter the draft angle into the expressions box.

What is loft in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.