Frequent question: How do you create multiple views of a part in SolidWorks?

How do I add more views to a SolidWorks drawing?

To insert a model view into a drawing:

1. Click Model View. (Drawing toolbar) or Insert > Drawing View > Model.
2. Set options in the Model View PropertyManager. …
3. Click Next . …
4. Set additional options in the Model View PropertyManager. …
5. Click .

How do I view different views in SolidWorks?

SOLIDWORKS®

To do this, click the View Orientation command at the top of the work area. Notice the 5 icons along the bottom of the command window. The first icon is the Single View option. This shows a single view of the part and is the default view for SolidWorks.

How do you make a 3 view drawing in SolidWorks?

To create the Standard 3 View by the standard method:

1. In a drawing, click Standard 3 View. (Drawing toolbar), or click Insert > Drawing View > Standard 3 View. …
2. Select the model in one of these ways: Select a model from Open documents in the Standard 3 View PropertyManager or browse to a model file and click.

How do you assign views in SolidWorks?

Changing the Orientation of the Standard Model Views

1. Do one of the following: Use the Rotate, Zoom, and Pan tools to orient the model. Click View Selector and select a view. …
2. Click Update Standard Views .
3. When prompted, select the standard view you want to assign the current view to.
4. Click Yes to confirm the update.

How do I bring a part into a view in Solidworks?

With a part document open, click Insert Part (Features toolbar) or Insert > Part. Browse to a part document and click Open. The Insert Part PropertyManager appears. Under Transfer, select any combination of items from the inserted part to be included in the derived part.

What is an auxiliary view in Solidworks?

An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view. You can use sketched lines for folding.

How do you switch between parts in SOLIDWORKS?

Ctrl+Tab. This shortcut is used to switch between open documents inside of SOLIDWORKS and works with drawings, assemblies and parts. Think Ctrl+ Alt + Tab in Windows, just for SOLIDWORKS. There are many more keyboard shortcuts that will improve your design experience.

How do I switch between part and assembly in SOLIDWORKS?

To replace one or more components:

1. Do one of the following: Click Replace Components (Assembly toolbar). Click File > Replace. …
2. Set options as described below, then click . The selected component instances are replaced. If you chose Manually select, choose the configuration to open in the Configurations dialog box.

How do I change the isometric view in SOLIDWORKS?

To change the orientation of a section or aligned section view to isometric: Right-click a section or aligned section view and select Isometric Section View. To remove the isometric orientation, right-click the view and select Remove Isometric View.

In what ways can you create a standard 3 view?

The Standard 3 View option under Insert > Drawing View creates three related default orthographic (front, right, left, top, bottom, and back) views of a part or assembly displayed at the same time. The view orientations used are based on the orientations (Front, Right, and Top) in the part or assembly.

How can you create relationships between parts within an assembly?

To create a part within an assembly:

1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
2. For externally saved parts, type a name for the new part in the Save As dialog box and click Save.
3. Select a plane or planar face (while the pointer is ).

What are the three standard views we show on your drawings?

Although six different sides can be drawn, usually three views of a drawing give enough information to make a three-dimensional object. These views are known as front view, top view and end view.

What is a Solidworks part?

part. A single 3D object made up of features. A part can become a component in an assembly, and it can be represented in 2D in a drawing. Examples of parts are bolt, pin, plate, and so on. The extension for a SOLIDWORKS part file name is .

How do you create a front plane in Solidworks?

Select the sketch in the FeatureManager design tree, and click Edit, Sketch Plane. Right-click the sketch in the FeatureManager design tree, and select Edit Sketch Plane . Select a new plane in the FeatureManager design tree or select a new planar face in the model for Sketch Plane/Face . Click OK .