Frequent question: How do you create a solid in Civil 3D?

How do you make a 3D solid in AutoCAD?

To create a 3D solid model by revolving

1. 1 Click.
2. ➤ Open. …
3. select rim. …
4. 4 On the status bar, click the Object Snap button to enable object snap mode.
5. 5 Right-click the Object Snap button and click Endpoint to turn it on. …
6. 6 On the ribbon, click Home tab ➤ Modeling panel ➤ Solid Creation drop-down ➤ Revolve.

How do you make a 3D solid on a surface?

To create a 3D solid by thickening a surface:

1. Click Solids > Solid Editing > Thicken (or type Thicken).
2. Select drawing objects of type surface to be converted to 3D solids. …
3. Specify the thickness for the new solid object.
4. The solid is created and the original surface becomes part of the new body.

How do you change from surface to solid in Civil 3D?

To Convert Surfaces That Enclose a Volume to a 3D Solid

1. Click Surface tab Edit panel Sculpt. Find.
2. Select one or more surfaces that completely enclose a volume. There must be no gaps between the surfaces. A 3D solid object is created.

How do you make a shape solid in AutoCAD?

Here are the steps:

1. First set the layer that you want to use for your solid fill. …
2. On the Home tab in the Draw panel, click Hatch. …
3. In the Pattern panel, choose Solid.
4. If you have one closed area, you can just click inside it to pick an internal point. …
5. Press Enter to end the HATCH command.

How do I convert 3D face to 3D in Autocad?

Solution

1. Enter CONVTOSURFACE on the command line.
2. Select the face that you want to convert.
3. Enter THICKEN on the command line.
4. Select the surface.
5. Enter a thickness value for the selected surface on the command line.
6. When prompted, choose whether or not to erase the defining surface.

How do you make a hollow object solid in Autocad?

To create a hollow solid:

1. Click Solid tab > Feature panel > Hollow to display the Hollow Solid dialog:
2. Use the dialog to remove a face of a solid and offset it to create a hollow solid.
3. Move the cursor over a solid. …
4. Click the face of the solid you want to remove to highlight it.

How do I change my surface to 3D face?

In AutoCAD Architecture, just select the solid cylinder, right-click > Convert To > Mass Element. Mass Elements are surfaces under the hood. So explode the Mass Element twice and you now have an array of 3D Faces that make up the cylinder.

How do you convert surface model to solid model in Inventor?

Now, to the important part – getting the surface converted to a solid body. One of the ways of doing that is using the Thicken / Offset tool. Select all faces (more options in the More tab), select the thickness and hit OK. Now because your surface has a thickness, it becomes a solid, as it now has some volume.

What command can be used for a solid fill hatch?

Hatch, Hatch Edit, Gradient, Boundary, Solid