Best answer: How do you lock a circle in a Revit family?

Go to the Modify tab and select the Align command from the Modify panel. You can now select the vertical reference plane, then the little cross at the circle centerpoint to lock the circle to that plane. Repeat the Align command to lock the circle to the horizontal reference plane.

How do you lock something in Revit?

Open the Revit Server Administrator. In the tree control, select the item, and click (lock). Note: If you use the command-line utility to apply a lock, the lock icon displays after a refresh operation, and information about the model in use displays in the right pane.

How do I lock a family in Revit?

You can’t lock a family, BUT, You can lock a family workset, so other will not be able to modify them. Simply make the families workset editable, and don’t relinquish that workset.

How do you lock an extrusion in Revit?

While in a sketch mode (or after finishing the sketch), a line in an extrusion can be locked with the reference plane it’s on top of by using the align tool to click both lines and then clicking the lock icon (see Figure 11).

Can you lock an image in Revit?

Revit LT displays a pushpin control near the element to indicate that it is pinned in place. To move or delete the element, you must first unlock it by clicking the pushpin control. Click the pushpin again to lock the element.

Can you lock walls in Revit?

See Move Lines and Components with Walls. To pin and element, do one of the following: Select the elements to be pinned, and then click Modify | tab Modify panel (Pin). Click Modify tab Modify panel (Pin), select the elements to be pinned, and then press Enter .

How do you draw a circle in Revit 2021?

Draw a circle by specifying its center point and the radius.

1. Select a tool that allows for a circle. …
2. Click Modify | Place Lines tab (or respective Modify | Place tab or Modify | Create tab) Draw panel (Circle).
3. On the Options Bar: …
4. Click in the drawing area to place the circle.

How do I cut a circle in Revit?

When selecting an element that needs to be trimmed to form the corner, make sure you click the part of the element to be retained. click Modify tab Modify panel (Trim/Extend Single Element). Select the reference to use as a boundary. Then select the element to trim or extend.

How do you draw an oval in Revit?

Sketch half of an ellipse.

1. Select a tool that allows for an ellipse. …
2. Click Place Lines tab (or respective Place tab or Create tab) Draw panel (Partial Ellipse) or (Pick Lines). …
3. If you selected Pick Lines, on the Options Bar optionally specify a value for Offset. …
4. Click in the drawing area.

How do you create a work plane in Revit family?

In the Family Editor, click Create tab Properties panel (Family Category and Parameters). In the Family Category and Parameters dialog, under Family Parameters, select Work Plane-Based. Click OK. Note: You can make a family both work plane-based and always vertical.

What is the Extrude command used for?

The Extrude command in AutoCAD 3D is used to create a surface or solid of a 2D surface or a 3D curve. The Extrude command is widely used to create walls, shapes, etc.

How do you rotate a work plane in Revit?

Rotate the grid: Click Modify | Work Plane Grid tab Modify panel (Rotate), and rotate the grid.