Your question: Why is my Solidworks model Hollow?

Why is my Solidworks model invisible?

If the model is a part file then the most common reason that the body has been hidden by mistake, which can happen if you happen to click on hide in connection with selecting a feature.

How do you fill hollow models in Solidworks?

To create a filled surface, click Filled Surface on the Surfaces toolbar, or click Insert > Surface > Fill, set the PropertyManager options, and click OK .

How do you make a part visible in Solidworks?

Right-click a component in the drawing view or in the FeatureManager design tree and select Show/Hide > Hide Component. If the component is hidden, you can show it again by right-clicking the component in the FeatureManager design tree (not in the drawing view) and selecting Show/Hide > Show Component.

How do you show solid bodies in Solidworks?

You can toggle the visibility of solid and surface bodies by moving the pointer over the body in the graphics area and clicking Tab to hide or Shift + Tab to show. In addition, you can show one or more hidden bodies by moving the pointer to the graphics area, and pressing and holding Ctrl + Shift + Tab.

How do you fill a cavity in Solidworks?

SOLIDWORKS make this an easy process even if the part is complex.

…

Filling a Mold Cavity Using Combine

1. Open the mold assembly in SOLIDWORKS.
2. Insert Components > New Part. Select a reference plane i.e. Top plane. Exit out of the sketch command.
3. Insert > Features > Join. Group select all of the parts of the assembly.

How do I fill a sketch in Solidworks?

To add an area hatch or solid fill:

1. In a drawing document, select a model face, a segment of a closed sketch profile, or a region bounded by a combination of model edges and sketch entities. …
2. Click Area Hatch/Fill (Annotation toolbar), or click Insert > Annotations > Area Hatch/Fill.

How do you make a hollow SolidWorks cylinder?

To Make a Hole Through the cylinder:

1. Select the front face of the cylinder by clicking on the circumference. …
2. Click Exit Sketch, then select the smaller circle by clicking on the circumference.
3. Select Extrude Cut, and in the Property Manager that appears on the left of your screen, make D1 60mm.

How do I change solid to surface in SolidWorks?

To convert features to bodies and surfaces: Open an assembly file, such as the HousingAssy. SLDASM model shown. The Housing component is part of an assembly.

…

In the dialog box:

1. Under File Name, change the name to Housing2. SLDPRT.
2. Select Save as.
3. Select Preserve reference geometry and sketches.
4. Click OK.

How do you convert surface model to solid model in Inventor?

Now, to the important part – getting the surface converted to a solid body. One of the ways of doing that is using the Thicken / Offset tool. Select all faces (more options in the More tab), select the thickness and hit OK. Now because your surface has a thickness, it becomes a solid, as it now has some volume.

How do you save an exploded view in Solidworks?

The View Manager dialog box opens.

1. Click Explode.
2. Click New. …
3. Press ENTER to accept the name or type a new name. …
4. Click Properties and set the explode position of the assembly components.
5. Click List to return to the exploded views list.
6. Click Edit > Save. …
7. Make sure the Explode check box is selected. …
8. Click OK and Close.