Use the Sweep tool to add a baseboard, crown molding, or other type of decorative horizontal or vertical projection to a wall. … Revit preselects the wall sweep location on each adjacent wall. If you are in a 3D view, you can add a wall sweep to all exterior walls by using the ViewCube to rotate the view.
How do you create a wall sweep in Revit?
Help
- Select a wall sweep in a 3D or elevation view, or click Architecture tab Build panel Wall drop-down (Wall: Sweep).
- On the Properties palette, click Edit Type, or click Modify | Place Sweep tab Properties panel Type Properties.
- In the Type Properties dialog, for Profile, select the desired profile type.
- Click OK.
What is a sweep in a foundation wall?
Foundation walls and piers in small residential buildings are usually made of masonry. … Horizontal bulging in the masonry is known as sweeping.
How do I load a wall sweep in Revit?
Load or sketch a profile. Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list. If the profile you need is not already loaded in the project, click Modify | Sweep tab Sweep panel (Load Profile) to load the profile.
How do you create a 3D sweep in Revit?
Create a 3D shape by sweeping a 2D profile along a path.
…
- Click Modify | Sweep tab Sweep panel, and select a profile from the Profile list. …
- On the Options Bar, use the X, Y, Angle, and Flip options to adjust the position of the profile. …
- Click Apply.
- Select the path, and in a 3D view, zoom in to see the profile.
How do you blend in Revit?
To create a blend, select the blend command. You are placed in the Sketch mode. Select a tool from the Draw menu to draw a closed-loop sketch for the base of the blend. Once the base sketch is complete, click Edit Top on the Mode panel of the contextual tab.
How do you create a void sweep in Revit?
To create a void swept blend, click Void Forms drop-down (Void Swept Blend).
…
To load a profile:
- Click Modify | Swept Blend tab Swept Blend panel, and select a profile from the Profile drop-down. …
- Zoom in to see the profile.
- Use the X, Y, Angle, and Flip options to adjust the position of the profile. …
- Click Apply.
How do I edit a wall sweep in Revit?
On the Modify | Sweep tab Sweep panel, click (Select Profile). On the Sweep panel, use the tools that display to select a new sweep profile or change the sweep profile location. To edit the existing profile, on the Sweep panel, click (Edit Profile), and use the tools on the Modify | Sweep > Edit Profile tab.
Where is Family Editor in Revit?
Select an instance of the family in the drawing area, and click Modify |
How do you reveal a wall in Revit?
Add a Wall Reveal
- Open a 3D or non-parallel elevation view.
- Click Architecture tab Build panel Wall drop-down (Wall: Reveal).
- In the Type Selector, select the desired type of wall reveal.
- Click Modify | Place Wall Reveal Placement panel, and select the orientation of the wall reveal: Horizontal or Vertical.