Your question: How do you align views in Solidworks drawing?

How do I align a section view in SolidWorks?

You can pre-select sketch entities that belong to the drawing sheet to create aligned section views. The sketch entities do not have to belong to an existing drawing view. To create an aligned section view: Click Aligned Section View on the Drawing toolbar, or click Insert, Drawing View, Aligned Section.

How do you move views in SolidWorks?

To move a drawing view, use one of the following methods:

  1. Click and drag an entity (including edges, vertices, cosmetic threads, and so on). …
  2. Select a drawing view, then move (nudge) it with the arrow keys. …
  3. Press Alt, place the pointer anywhere in the view, and drag the view.

How do I fix drawing view in SolidWorks?

Resolving the empty view Issue

  1. Close the drawing (no need to save)
  2. Select File > Open > select the drawing, but do not open yet > References > double-click the model > browse to the model’s new location. …
  3. The new folder path appears in green in the dialog box, to confirm the change press OK.
IT IS INTERESTING:  Is chief architect easy to use?

What is an aligned section view?

An aligned section view is drawn as if the cutting plane line ran straight across the object. The cutting plane line is rotated into a straight position, and the section view is projected.

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

How do I align two components in SolidWorks?

Align Components PropertyManager

  1. Add the component by dragging it in the graphics area.
  2. Right-click the component and click Align Components.

How do you align two lines in SolidWorks?

Align Between Lines

  1. In the graphics area: Select one or more annotations. Select two horizontal or vertical lines. To use Align Between Lines in a part or assembly, you must be editing the sketch lines.
  2. Click Align Between Lines. (Align toolbar), or click Tools > Align > Align Between Lines.

How do you center a drawing in SolidWorks?

Aligning One Drawing View to Another

  1. Do one of the following: Select a drawing view, and click Tools > Align Drawing View > Horizontal To Another View or Vertical To Another View. …
  2. Select the view to which you want to align. The model origins or drawing view centers of the views are aligned along the chosen direction.

How do I create a projected view in SolidWorks?

To create a projected view:

  1. Click Projected View. …
  2. In the graphics area, select a view from which to project.
  3. To select the direction of projection, move the pointer to the appropriate side of the selected view. …
  4. When the view is where you want it, click to place the view.
IT IS INTERESTING:  How do I load a multi category tag in Revit?

How do you use alternate position view?

Insert a model view of the assembly using the orientation needed for the Alternate Position View. Position the assembly in its starting position. (Drawing toolbar), or click Insert > Drawing View > Alternate Position. The Alternate Position PropertyManager appears.

What is projected view in SolidWorks?

Projected views are created by folding off an existing view in one of eight possible projections. The resulting view orientation is affected by the setting of First angle or Third angle projection as defined in the drawing sheet properties.

What is an auxiliary view in Solidworks?

An Auxiliary View is similar to a Projected View, but it is unfolded normal to a reference edge in an existing view. You can create an auxiliary view of an exploded assembly view. You can use sketched lines for folding.

How do you change isometric view in Solidworks?

To change the orientation of a section or aligned section view to isometric: Right-click a section or aligned section view and select Isometric Section View. To remove the isometric orientation, right-click the view and select Remove Isometric View.

How do you add perspective view in Solidworks?

To display the model in Perspective view: Expand View Settings (Heads-up View toolbar) and click Perspective , or click View > Display > Perspective. Search ‘Perspective’ in the SOLIDWORKS Knowledge Base.

Special Project