You asked: How do you use the wrap feature in Solidworks?

What is wrap feature?

About the Wrap Feature. Use the Wrap tool to drop a sketch onto geometry and then wrap the sketch around geometry to create a formed datum curve. You can then use the formed curve to create items such as labels or screw threads. The formed datum curve preserves the length of the original sketch when possible.

How do you wrap an image in Solidworks?

Check PhotoView 360 in the menu. Select the surface where you want to project the Display image. Click on the “Fit width to selection” option. (You can also change the size of the image by dragging onto the green corner points) and drag the image over the display to cover the complete surface.

Which one is the method to create a wrap feature?

The wrap can be created using an analytical method (for planar or non-planar faces) or a spline surface method (which wraps your sketch on to any face type). Within the wrap function, you can emboss, which applies raised features to a surface. You can also deboss, which indents features.

IT IS INTERESTING:  Best answer: How do you use the Intersect tool in SolidWorks?

How do you use Onshape wrap tool?

Select Solid, Surface, or Split. Select the Tools, which are the faces or sketch regions that you are wrapping around the cylinder. Select the Target, the cylinder you are wrapping faces or sketch regions around.

What is pull direction in wrap solidworks?

For a line or linear edge, the pull direction is the direction of the selected entity. For a plane, the pull direction is normal to the plane. Pull direction – Plane A. Pull direction – Plane B. To wrap the sketch normal to the sketch plane, leave Pull Direction blank.

How do I make text bigger in Solidworks?

You can set a custom text scale for text annotations in parts and assemblies. To set a custom text scale: Click Tools > Options > Document Properties > Detailing . In the dialog box, clear Always display text at the same size.

How do I project a sketch to a surface in Solidworks?

Click Project Curve on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. Under Sketch to Project , select the curve in the graphics area or from the flyout FeatureManager design tree.

How do you use the circular pattern feature in Solidworks?

Use circular patterns to create multiple instances of one or more features that you can space uniformly around an axis.



To create a circular pattern:

  1. Create one or more features to replicate.
  2. Click Circular Pattern (Features toolbar) or Insert > Pattern/Mirror > Circular Pattern.
  3. Set the PropertyManager options.
  4. Click .

How do you make a decal in Solidworks?

To create decals:

  1. In the Palette, on the Appearances tab, do one of the following: Click Add (Palette toolbar) and click New Decal. …
  2. In the dialog box, browse to an image file to use as a decal and click Open. …
  3. Drag the decal from the tree and drop it onto geometry in the viewport.
IT IS INTERESTING:  Is there a fillet command in Revit?

How do you use sheet metal in Solidworks?

To do this we simply need to right-click any tab on the CommandManager and select Sheet Metal from the drop down menu. Next, we will activate the Sheet Metal tab of the Command Manager and click Base Flange/Tab tool, which should be the first tool on the right not grayed out when beginning a part.

How do you bend a part in Solidworks?

To create a sketched bend feature:

  1. Sketch a line on a planar face of the sheet metal part. …
  2. Click Sketched Bend. …
  3. In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
  4. Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .
Special Project