You asked: How do you cut a planer in Solidworks?

How do you cut a part on a plane?

Cutting the Part by the Sketch Plane

1. Double-click Sketch. 2 from the geometry. …
2. Move the sketch so that you can see the whole part.
3. Click Cut Part by Sketch Plane from the Visualization toolbar.

How do you cut a shape in Solidworks?

To trim a surface:

1. Create two or more surfaces that intersect at one or more points, or create a surface that intersects with a plane or has a sketch on its face.
2. Click Trim Surface on the Surfaces toolbar, or click Insert > Surface > Trim.
3. In the PropertyManager, under Trim Type, select a type:

How do you make a plane in Solidworks?

Adding planes to SOLIDWORKS is achieved using the Plane Wizard. The Plane Wizard can be accessed via Features > Reference Geometry > Plane on the command manager, or via Insert > Reference Geometry > Plane from the drop down menu. Up to three references can be selected in order to define a new plane.

What does the trim tool do in Solidworks?

The power trim tool is a favorite among SOLIDWORKS users. It’s a handy tool to cut away, trim or sketch geometry quickly.

How do you trim intersecting solids in Solidworks?

Intersecting Bodies to Modify Part Geometry

1. With the part open, click Insert > Features > Intersect .
2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
4. Click Intersect. …
5. Select regions to exclude. …
6. Select options as required:

How do I use the parting surface in Solidworks?

Manual Mode for Parting Surfaces

1. Click Parting Surfaces (Mold Tools toolbar).
2. Click Insert > Molds > Parting Surface.
3. Select a Parting Surface feature in the FeatureManager design tree and click Edit Feature .

How do I cut part of a Solidworks assembly?

To create an assembly feature cut:

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you cut a part in half in Solidworks?

(Drawing toolbar) or Insert > Drawing View > Section. In the Section View PropertyManager, click Section or Half Section. You can use Tab to switch between Cutting Lines in Section or Half Section.

What is a plane in Solidworks?

SolidWorks provides Front, Top, and Right planes as defaults. The orientations (Front, Top, Right, and so on) relate to these planes. Planes are used for sketching and for creating geometry for features.