You asked: How do you change a vertical and horizontal scale in AutoCAD?

How do I change the scale of one direction in AutoCAD?

To scale in one direction: 1. Select the object, right click-scale, snap to point (left click on ) from wich you want the object to be scaled, enter the scale value, enter, done.

How do you scale two directions in AutoCAD?

To non-uniformly scale an object:

1. Select the objects to scale. …
2. Click Edit tab > Transform panel > Scale. …
3. Move the scale origin as required.
4. To keep the original object, click .
5. From the drop-down list, select Non-Uniform. …
6. Enter a scaling factor for each axis.

How do you scale and rotate in AutoCAD?

Rotate Objects by Reference

1. Draw a series of lines at any angle.
2. On the ribbon, click Home tab > Modify panel > Rotate. …
3. Select the lines you previously drew.
4. Specify the start point of one line you drew as the base point for the rotation.
5. At the prompt, Specify rotation angle, enter R or choose the Reference option.

How do I change the layout scale in AutoCAD?

Using the Properties palette . . .

1. Select the layout viewport that you want to modify.
2. Right-click, and then choose Properties.
3. If necessary, click Display Locked and choose No.
4. In the Properties palette, select Standard Scale, and then select a new scale from the list. The scale you choose is applied to the viewport.

How do I manage attributes in AutoCAD?

In the list of attributes, double-click the attribute you want to edit, or select the attribute and click Edit. In the Edit Attribute dialog box, make changes on the following tabs and click OK: Attribute tab.

What is AutoCAD scale?

Scale Factor. Multiplies the dimensions of the selected objects by the specified scale. A scale factor greater than 1 enlarges the objects. A scale factor between 0 and 1 shrinks the objects. You can also drag the cursor to make the object larger or smaller.

How do you scale an object?

To scale one or more objects, first select the objects to be scaled and choose the Scale tool. With the Scale tool active, click and drag anywhere on the canvas to resize the selected objects. Hold the Shift ⇧ key while resizing to scale the object only horizontally or vertically.

How do you scale an object to match another in AutoCAD?

To Scale an Object by Reference

1. Click Home tab Modify panel Scale. Find.
2. Select the object to scale.
3. Select the base point.
4. Enter r (Reference).
5. Select the first and second reference points, or enter a value for the reference length.

How does AutoCAD calculate scale?

To Check the Scale of a Scale Area or Viewport

1. Click View tab Viewports panel Scale Monitor. Find. The Scale Monitor dialog box is displayed.
2. In the drawing area, move the cursor over the scale area (or a viewport ) and check the Scale Monitor dialog box.
3. Press ENTER to exit this command.

How do I change scale 1 to 100 in AutoCAD?

For scale of 1:100 use the SCALE command to scale the rectangle 100 times. Put this rectangle around what you want to plot then plot using Window and select the corners of the rectangle. Use scale to fit for the scaling and print it out.