You asked: How do I zoom in with Catia mouse?

How do you change mouse buttons in Catia?

You can also access the Button Customization dialog box using one of the methods below:

1. Select Tools > Customize , choose the Commands tab then select VR Button Customization.
2. Select View > Commands List then select VR Button Customization.

How do I move the camera in Catia?

Select the Position tab.

1. Click the Update camera from view radio button and click the OK button in the Properties dialog box to confirm.
2. Pan, rotate and zoom in the main window to define the view that the camera will represent. The camera is automatically updated from the view.

How do you pan in Catia?

Press and hold a side button, then middle-click and drag. Pans the structure. Release the mouse buttons and start again. Returns to pan mode from rotation or zoom mode.

How do you zoom in and zoom out in Creo?

You can zoom in the selected area of a graphics window using the one of the following options:

1. Press CTRL and middle-click. The pointer changes to . …
2. Drag the mouse diagonally over the target geometry and center the geometry in the zoom box. As you drag, the zoom box is created.
3. Middle-click to define the zoom box.

How do I edit parts in assembly Catia?

Editing a Part in an Assembly Design Context

1. Click on the + sign to the left of the CRIC_SCREW component in the tree. …
2. Double-click on the part CRIC_SCREW to open CATIA – Part Design workbench. …
3. CATIA – Part Design workbench is displayed. …
4. Double-click the feature you need to edit.

How do I edit part of Catia?

Open the Edit1. CATPart document. Double-click the draft to be edited (in the specification tree or in the geometry area).

…

command which will display the edit dialog box.

1. Enter a new draft angle value.
2. Click OK . …
3. Now, double-click the pad. …
4. Enter a new length value.
5. Uncheck the Mirrored extent option.

How do I rotate in Catia Drafting?

1- Open CATIA 2- Open new drawing 3- Create a circle ,Create center line for the circle 4- Click Rotate icon 5- Select the center line and then its center point 6- Input the angle value 45 deg 7- Check off Duplicate mode 8- Click OK .

How do I move trees in Catia?

Select General > Display. Go to the Tree Manipulation tab. Under Zoom on Tree, clear this check box. If you should have the need to resize your tree afterwards, hold down the key while scrolling the mouse wheel as an alternative.