You asked: How do I create a new subassembly in Solidworks?

How do you create a subassembly?

To create a subassembly from a polyline

1. Create the desired polyline shape in the drawing.
2. Click Home tab Create Design panel Create Subassembly From Polyline Find.
3. Click the polyline object in the drawing and press Enter.
4. In the Create Assembly dialog box, for Name, enter a name for the subassembly.

How do I change the configuration of a subassembly in Solidworks?

To change the component configuration in an assembly:

1. Click the component or subassembly.
2. In the context toolbar, select a configuration from the list at the top.
3. Click .

How do you save a sub assembly in Solidworks?

With your top level assembly open, left click on a sub-assembly that you would like to save as a part and chose Open Subassembly. 2. With the sub-assembly open click File, Save as. Chose the option to Save as when prompted.

How do you make a subassembly flexible in Solidworks?

To make a subassembly flexible: Click a subassembly in the FeatureManager design tree and select Component Properties . In the dialog box, under Solve as, select Flexible, then click OK.

How do you dissolve a subassembly in Solidworks?

To dissolve a subassembly from the graphics area, right-click the subassembly and click Select Subassembly. Then right-click in the graphics area and click Dissolve Subassembly.

How do I unlink a configuration in Solidworks?

Deleting a configuration does not delete any features or components.

1. In the ConfigurationManager, activate a configuration that you want to keep. The configuration that you want to delete must not be active.
2. Right-click the name of the configuration you want to delete, and select Delete. …
3. Click Yes.

How do I create assembly configurations in Solidworks?

Special Assembly Configurations

1. Click File > Open.
2. Browse to the desired assembly document, select Advanced under Configurations, and click Open.
3. In the Configure Document dialog box, select one of the following: Option. Description. …
4. Type a new Configuration name, and click OK. The assembly opens in the new configuration.

How do you switch between configurations in an assembly?

Configure Component

1. In an assembly, right-click a component and click Configure Component .
2. In the Modify Configurations dialog box, you can: Create new assembly configurations. Change the component configuration used in each assembly configuration. Suppress or unsuppress the component for each assembly configuration.

How do I add assembly to another assembly in Solidworks?

To insert a new subassembly: Do one of the following: In the FeatureManager design tree, right-click either the top-level assembly icon or the icon for an existing subassembly, and select Insert New Subassembly. Click New Assembly (Assembly toolbar) or Insert > Component > New Assembly.

Can you save an assembly as a part?

To open the Save Assembly as Part PropertyManager: In an assembly, click File > Save As. Select Part (*.

Can I import an assembly into an assembly in Solidworks?

You can assemble the SolidWorks part or assembly as a non-Creo model in the existing assembly by default. You must explicitly select Import to import and assemble the part or assembly in the existing assembly.

How do you make a subassembly flexible?

To make a subassembly flexible:

1. Click a subassembly in the FeatureManager design tree and select Component Properties .
2. In the dialog box, under Solve as, select Flexible, then click OK. Flexible is not available for lightweight subassemblies.

How do I move subassembly components in Solidworks?

To move a component that is already in the assembly into the subassembly, see Dragging Components in the FeatureManager Design Tree or Editing Assembly Structure. To add an existing, saved component to the subassembly, right-click the subassembly icon in the FeatureManager design tree, and select Edit Subassembly.

How do I remove part of a subassembly?

To delete a component from a subassembly:

1. In an assembly with a subassembly, in the FeatureManager design tree, select a subassembly component and press Delete.
2. In the dialog box, select whether to Delete the subassembly, or Delete only the selected components.