Why can’t I select something in AutoCAD?

How do you select something in AutoCAD?

To Select Objects

1. Do one of the following: Select individual objects by clicking them. Drag from left to right to select all objects that are entirely enclosed in the selection rectangle or lasso (window selection). …
2. Press Enter to end object selection.

How do you activate a selection in AutoCAD?

To activate it, type FS on the command line. Select the objects and press Enter after finishing. It increases the speed of selection.

How do I select a pick in AutoCAD?

To Specify a Precise Point Location

1. At a prompt for a point, hold down Shift and then right-click in the drawing area. Choose the object snap that you want to use.
2. Move your cursor over the desired object snap location. …
3. Select the object.

Why does AutoCAD say no selection?

This issue is usually due to dense hatch patterns in the drawing. If the properties selection shows “No selection” and is blank, try changing the variable PROPOBJLIMIT to 0: This value is set by default to 25000 and has a maximum of 32767. Settings this to 0 removes the limitation, but will affect performance.

How do I select an old object in AutoCAD?

Enter your move command, when prompted to select items simply type “p” then enter. It will select all the previously selected items.

How do you select set of object in a drawing?

In the Quick Select dialog box, under Apply To, select Entire Drawing or the current selection set (if one exists). To select a group of objects to which you want to apply the filtering criteria, click Select Objects. Under Object Type, select a single object type if the objects you want are all one type.

How do I make one object in AutoCAD?

To Join Objects

1. Click Home tab Modify panel Join. Find.
2. Select a source object or select multiple objects to join together.
3. Valid objects include lines, arcs, elliptical arcs, polylines, 3D polylines, and splines.

Why is osnap not working?

Press F3 to toggle osnaps on/off. Check that osnap is On (OSNAP command) and that the snap function is also selected. Flatten the drawing or make sure that all objects are on the same plane, or with the same Z value. Check the value of the AUTOSNAP variable and make sure that it is an odd number.

Where is osnap in AutoCAD?

From the pull-down menu select Tools Drafting Settings… and when the dialogue box appears, click on the Object Snap tab to display the Object Snap settings. Check the boxes against the Center and Endpoint osnaps if they are not already selected.

How do I enable osnap in AutoCAD?

Use Running Object Snaps



On the status bar, click the Object Snap button or press F3 to turn running object snaps on and off. On the status bar, click the down-arrow next to the Object Snap button, and then click the object snaps that you want to persist.

How do you fix properties in Autocad?

Change the palette settings

1. Enter CUI on the command line.
2. Select your workspace on the left.
3. Click the Customize Workspace button on the right.
4. Expand Palettes and select Properties.
5. Change the appearance settings to: Show: Yes. Orientation: Floating. Allow Docking: No. …
6. Click the Done button and then click OK.

How do I show the properties palette in Autocad?

Using the Properties palette as an example, follow these steps:

1. Enter CUI on the command line.
2. Select the workspace on the left.
3. Click the “Customize Workspace” button on the right.
4. Expand “Palettes” and select “Properties”.
5. Change the appearance settings to: …
6. Click “Done” at the top and then click “OK”.