What is the use of TRIM command in AutoCAD?

Trims objects to meet the edges of other objects. To trim objects, select the boundaries and press Enter. Then select the objects that you want to trim.

What is the use of TRIM command?

A trim command (known as TRIM in the ATA command set, and UNMAP in the SCSI command set) allows an operating system to inform a solid-state drive (SSD) which blocks of data are no longer considered to be ‘in use‘ and therefore can be erased internally. Trim was introduced soon after SSDs were introduced.

What is the function of TRIM in AutoCAD?

The Trim command in AutoCAD is used to remove the objects, which meet the edges of other objects. It is used to remove extra lines or extra parts of an object. We can also perform trim using different selection methods. We are required to select the portion of the object to trim.

What is difference between erase and TRIM in AutoCAD?

As verbs the difference between trim and erase



is that trim is to reduce slightly; to cut; especially, to remove excess; eg ‘trim a hedge’, ‘trim a beard’ the adposition of can be used in present perfect tense to designate the removed part while erase is to remove markings or information.

What is the full form of AutoCAD?

Computer-aided design. License. Trialware. Website. autodesk.com/autocad.

What is the difference between trim and extend command?

Extending operates the same way as trimming. You can extend objects so they end precisely at boundary edges defined by other objects. In this example, you extend the lines precisely to a circle, which is the boundary edge.

Why trim is not working in AutoCAD?

Check if the PICKADD variable is set to 2. If not you should set it to 2. Pre-select the elements and then call the TRIM command. Enter TRIM Command once in the command line and then hit enter again before using the TRIM.

What is Edgemode AutoCAD?

1. Extends or trims the selected object to an imaginary extension of the cutting or boundary edge. Lines, arcs, elliptical arcs, rays, and polylines are objects eligible for natural extension.

What are the shortcut keys in AutoCAD?

Manage Workflow

How do you use Extend command?

EXTEND (Command)

1. Boundary Object Selection. Uses the selected objects to define the boundary edges to which you want to extend an object.
2. Object to Extend. Specifies the objects to extend. …
3. Shift-Select to Trim. Trims the selected objects to the nearest boundary rather than extending them. …
4. Fence. …
5. Crossing. …
6. Project. …
7. Edge. …
8. Undo.

What is the difference between trim and delete?

TRIM removes one or more elements from the END of a collection, whereas DELETE will remove the element(s) you specify anywhere in the collection. TRIM frees the space for removed elements and DELETE does not ( unless you DELETE ALL elements that is ).

How do you erase in AutoCAD?

To Erase an Object

1. Click Home tab Modify panel Erase. Find.
2. At the Select Objects prompt, use a selection method to select the objects to be erased or enter an option: Enter L (Last) to erase the last object drawn. Enter p (Previous) to erase the last selection set. …
3. Press Enter to end the command.