What is Auto Relief in solidworks?

How do I turn off auto relief in Solidworks?

Right-click the Sheet-Metal feature in the FeatureManager design tree and select Edit Feature. In the PropertyManager, under Auto Relief, change the type of relief cut.

How do you add a relief in Solidworks?

Adding a Corner Relief

1. Click Corner Relief. …
2. In the Corner Relief PropertyManager, under Corner Type, select a two or three bend corner.
3. Under Scope , select the sheet metal body to which to apply the corner relief.
4. Under Corners , click Collect all corners to list all corners in the sheet metal body.

How do you create a relief cut in Solidworks?

Changing Auto Reliefs

1. In the FeatureManager design tree, right-click the feature bend you want to edit, and select Edit Feature.
2. In the PropertyManager, select Custom Relief Type.
3. Under Custom Relief Type: Set a relief cut in Relief Type. If you selected Rectangle or Obround, change the values for Relief Width. …
4. Click .

What is Corner relief in sheet metal?

About Corner Relief. Use the Corner Relief tool to add relief to one or more corners of a sheet metal part. When you add relief, sheet metal sections are removed from the model. You can apply corner relief automatically to all corners or manually to individual sets of corners.

How do I use the edge flange in Solidworks?

Adding Edge Flanges

1. In an open sheet metal part, click Edge Flange. (Sheet Metal toolbar) or Insert > Sheet Metal > Edge Flange.
2. In the graphics area, select one or more edges for Edge . There are specific requirements for adding edge flanges to curved edges. …
3. Set options in the Edge-Flange PropertyManager and click .

How do you bend a relief in Solidworks?

To change the type and size of a relief cut for a feature bend:

1. In the FeatureManager design tree, right-click the feature bend you want to edit, and select Edit Feature.
2. In the PropertyManager, select Custom Relief Type.
3. Under Custom Relief Type: Set a relief cut in Relief Type. …
4. Click .

How do you calculate K factor?

K factor is a ratio between the distance from the neutral bend line to the inside bend radius and the material thickness. K factor uses the formula K factor = δ/T. Y factor uses the formula Y factor = K factor * (Π/2).

How do you corner trim in Solidworks?

To create a corner-trim:

1. Create a sheet metal part.
2. Click Corner-Trim. (Sheet Metal toolbar) or click Insert > Sheet Metal > Corner Trim.
3. In the Corner-Trim PropertyManager, set the following under Relief Options: Select edges for Corner edges . Click Collect all corners. Select a value for Relief Type. …
4. Click .

How do you use sheet metal in Solidworks?

To do this we simply need to right-click any tab on the CommandManager and select Sheet Metal from the drop down menu. Next, we will activate the Sheet Metal tab of the Command Manager and click Base Flange/Tab tool, which should be the first tool on the right not grayed out when beginning a part.

What is corner setting?

The corner setting technique and bottoming process were designed for experiments. The corner setting technique and bottoming has reduced the thickness in bending area to 5, 10, 15 and 20 percent of the original sheet thickness. Clearance between punch and die of both processes was equal to same the thickness.

What is K factor sheet metal?

In sheet metal, the K-factor is the ratio of the neutral axis to the material thickness. When a piece of metal is being formed, the inner portion of the bend compresses while the outer portion expands (see Figure 1).

What is the minimum sheet metal thickness?

The thickness of sheet metal starts from 0.5 mm and goes up to 6 mm. Anything above that is a metal plate. The thin sheet metal is easy to form, while still providing great strength.