What is a reference plan in Revit?

What is reference plane in Revit?

Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model. Topics in this section. Add a Reference Plane. Use the Line tool or the Pick Line tool to draw a reference plane.

How do you create a reference plan in Revit?

Use the Line tool or the Pick Line tool to draw a reference plane.

1. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane) …
2. To draw a line: On the Draw panel, click (Line). …
3. To pick an existing line: On the Draw panel, click (Pick Lines).

What do you mean by reference plane?

In celestial mechanics, the plane of reference (or reference plane) is the plane used to define orbital elements (positions). The two main orbital elements that are measured with respect to the plane of reference are the inclination and the longitude of the ascending node.

Where is the reference plane in Revit?

On the ribbon, click (Reference Plane). To draw a line: On the Draw panel, click (Line). In the drawing area, draw the reference planes by dragging the cursor.

What is the difference between reference plane and reference line in Revit?

What is the difference between reference planes and reference lines? A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.

How do you turn off reference planes in Revit?

Hide the Reference Plane in the View

1. Select one or more reference planes to hide.
2. Right-click and click Hide in View Elements. To hide the selected annotations and all other annotations of the same category in the current view, click Hide in View Category.

How do you lock reference planes in Revit?

To constrain the sketch of a piece of geometry during creation:

1. Use the Align tool and select the specific reference plane and the sketch line to establish the constraint.
2. When the lock symbol displays, click it to lock the constraint.

How do you show reference planes in 3D Revit?

Simply select the element you are having problems visualizing and then press the right click button of the mouse and select “Maximize 3D Extents” (See above). This will slightly modify the representation of the plane on the current view, but it will make it visible in all other views.

How do you move a reference plane in Revit?

In case anyone else runs into this (and maybe you aren’t so stupid as me and won’t), when your horizontal planes can’t move, go to elevation view, click the plane and look for a lock symbol. Click that and the plane will be free to move.

What are the different types of reference planes?

1.1 shows the three standard reference planes: the medial (mid-sagittal), the frontal (or coronal), and the transverse planes, all at 90 degrees to each other and usually set to meet in the center of mass of the whole body.

What is reference line?

A reference line, also referred to as a base line, is a user-defined vertical or horizontal line in the graph. Use reference lines to compare, reference, or measure against the data values displayed in the graph.

What is reference plane in PCB?

The most ideal return path for a signal in a circuit board is a large area of metal, or a plane layer, which becomes the reference plane. Usually, this will be a ground plane, and it needs to be on an adjoining layer to the signal trace with a layer of dielectric between them.

How do you draw reference line in Revit?

In the Family Editor, click Create tab Datum panel (Reference Line). Using the drawing tools, sketch the line. The line displays as a solitary solid line until selected or when highlighted during preselection. When selected or highlighted, the associated planes display according to the active view.

How do you change a reference plane?

Select a work plane-based element in a view. Click Modify | <Element> tab Work Plane panel (Edit Work Plane).
…
In the Work Plane dialog, select another work plane.

1. Name—Choose an available work plane from the list, and click OK. …
2. Pick a plane—Revit creates a plane coincident to the selected plane.