What does press pull do in Fusion 360?

What is difference between Extrude and push pull in Fusion 360?

Difference between Extrude/PushPull commands: Extrude works on sketch profiles and/or planar faces. PushPull works on faces and/or edges. Invoking PushPull on a sketch profile turns it into an Extrude command.

How do you Extrude a body in Fusion 360?

Learn how to use the Extrude command to create a solid body from a sketch profile or face in Fusion 360.

  1. On the toolbar, click Solid > Create > Extrude . …
  2. In the canvas, select one or more coplanar sketch profiles or planar faces to extrude.
  3. In the dialog, select an extrude Type:

What’s the difference between Extrude and Presspull?

If you use the Presspull command on an existing face then a simple extrusion will be created but if you press and hold the CTRL key and then use Presspull command on the surface then the extrusion will follow the geometry along the profile of 3D solid as shown in the image below.

What is revolve in Fusion 360?

The Revolve command creates T-Spline, solid, or surface revolved features by sweeping sketch and model geometry around an axis. Note: When you invoke the Revolve command, and there is only one profile visible in your design, it gets automatically selected.

IT IS INTERESTING:  What are the advantages of using Revit software?

How do you fillet a Fusion 360?

You can either type out a different fillet radius in the input box. Select a plane, draw a rectangle then specify the height of the box. More, or you can simply drag the blue directional arrow to manually change the fillet radius. To place the fillet simply hit the “enter” key on your keyboard.

How do you copy and paste a sketch in Fusion 360?

To copy and paste a sketch into another sketch, perform the following:

  1. Select the sketch entities to be copied (either left-click or window select).
  2. Right-click and select Copy.
  3. Click to deselect the copied entities. …
  4. Edit Sketch or Create Sketch so that sketch mode is active.
  5. Right-click and select Paste.

How do you cut extrudes in Fusion 360?

Ther is no specific cut-extrude function in Fusion 360. It’s not needed. When you try to push-pull geometry into existing geometry the default behavior is to cut.

What does extruding mean?

transitive verb. : to force, press, or push out. intransitive verb. : to become extruded.

How do you reverse a body in Fusion 360?

What you need to do is:

  1. Mirror as new body.
  2. Copy that new body from the browser.
  3. Create new component in the browser.
  4. Paste that body into created component.
  5. Remove (don’t delete otherwise you have yellow warnings) not needed components.

How do you ungroup a body in Fusion 360?

To ungroup objects, select a group node in the Object Lister, click it with the and choose Ungroup from the menu.

Special Project