Quick Answer: Where is revolve in SolidWorks?

What is the revolve feature in SolidWorks?

Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.

Why can’t I revolve SolidWorks?

Unless you’re creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.

How do you do a revolved cut in SolidWorks?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do you make a revolve?

To view the revolve, open a 3D view.

…

Use the Draw tools to sketch a shape to revolve around the axis:

1. Click Modify | Create Revolve tab Draw panel (Boundary Line).
2. To create a single revolve, sketch a closed loop.
3. To create more than one revolve, sketch multiple, non-intersecting, closed loops.

How do you add an axis in SolidWorks?

Creating Reference Axes

1. Click Axis. on the Reference Geometry toolbar, or click Insert > Reference Geometry > Axis.
2. Select the axis type in the Axis PropertyManager, then select the required entities for that type.
3. Verify that the items listed in Reference Entities. …
4. Click. …
5. Click View > Hide/Show > Axes to see the new axis.

How do you use revolve Extrude in Solidworks?

Creating Extruded or Revolved Cuts as Assembly Features

1. Open a sketch on a face or plane, and sketch a profile of the cut. …
2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
3. Set the options as needed in the Extrude or Revolve PropertyManager.

How do I get my solidworks toolbar back?

To display SOLIDWORKS toolbars:

1. Right-click in the window border and select or clear a toolbar name.
2. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.

Can you revolve a 3D sketch in Solidworks?

The sketch for a thin or surface revolved feature can contain multiple open or closed intersecting profiles. The profile sketch must be a 2D sketch; 3D sketches are not supported for profiles. The Axis of Revolution can be a 3D sketch.

How do you make a cone in SolidWorks?

To create a cone:

1. Click Solids > Draw > Cone (or type Cone).
2. Set an option for the cone’s base: Center point base: Click in the graphics area to specify a center point or type the 3D coordinates. …
3. Set the cone height: Click in the graphics area or type a value. – or –

What is loft in SolidWorks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

What is fillet in SolidWorks?

Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of a face, selected sets of faces, selected edges, or edge loops.