What is Miter flange in Solidworks?
A miter flange feature adds a series of flanges to one or more edges of a sheet metal part. The sketch for a miter flange must adhere to the following requirements: The sketch can contain lines or arcs. If you use an arc to create a miter flange, the arc cannot be tangent to the thickness edge.
How do you bend and cut in Solidworks?
To cut across sheet metal bends:
- In an existing sheet metal part, click Unfold. or Insert > Sheet Metal > Unfold. …
- In the graphics area: …
- Click . …
- Sketch a closed profile across the flattened bend, and extrude the cut Through All.
- To restore the part to the bent state, click Fold. …
- In the graphics area: …
- Click .
How do you bend bend in Solidworks?
Sketched Bend PropertyManager
- Sketch a line on a planar face of the sheet metal part. …
- Click Sketched Bend. …
- In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
- Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .
How do you make a sketched bend in Solidworks?
To create a sketched bend feature:
- Sketch a line on a planar face of the sheet metal part. …
- Click Sketched Bend. …
- In the graphics area, select a face that does not move as a result of the bend for Fixed Face .
- Click a Bend position of Bend Centerline , Material Inside , Material Outside , or Bend Outside .
How do I create a hem in Solidworks?
on the Sheet Metal toolbar, or click Insert > Sheet Metal > Hem. In the graphics area, select the edges where you want to add a hem. In the PropertyManager, under Edges: Click Edit Hem Width to edit the sketch of the profile.
How do you get sheet metal in Solidworks?
To convert a solid part to a sheet metal part:
- Create the solid part.
- Click Convert to Sheet Metal (Sheet Metal toolbar) or Insert > Sheet Metal > Convert To Sheet Metal .
- In the PropertyManager, under Sheet Metal Gauges, set options if you want to use a gauge table: …
- Under Sheet Metal Parameters:
How do I roll a part in Solidworks?
Rolls the model view in part and assembly documents. Click Roll View (View toolbar) or View > Modify > Roll, then drag the pointer left or right. Hold down Alt and drag with the middle mouse button. Hold down Alt and press the left-right arrow keys.
What is normal cut solidworks?
When adding a cut to a folded sheet metal part, select Normal cut to ensure that the cut is created normal to the sheet metal thickness. Normal cut is located in the Cut-Extrude PropertyManager, and only appears with sheet metal.
How do you make a hole in sheet metal solidworks?
To create and position a simple hole:
- Select a planar face on which to create the hole.
- Click Simple Hole (Sheet Metal toolbar) or Insert > Features > Simple Hole.
- In the PropertyManager, set the options.
- Click OK to create the simple hole.
Can you make parts bend in Solidworks?
SOLIDWORKS Flex Feature for bending, stretching, tapering, and twisting your parts.