Question: How do you create a reference plan in Revit?

What is a reference plane in Revit?

Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model. Topics in this section. Add a Reference Plane. Use the Line tool or the Pick Line tool to draw a reference plane.

Where is the reference plane in Revit?

On the ribbon, click (Reference Plane). To draw a line: On the Draw panel, click (Line). In the drawing area, draw the reference planes by dragging the cursor.

What is the difference between reference plane and reference line in Revit?

What is the difference between reference planes and reference lines? A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.

How do you change a reference plane in Revit?

Select a work plane-based element in a view. Click Modify | <Element> tab Work Plane panel (Edit Work Plane).
…
In the Work Plane dialog, select another work plane.

1. Name—Choose an available work plane from the list, and click OK. …
2. Pick a plane—Revit creates a plane coincident to the selected plane.

How do you create a reference plane?

Use the Line tool or the Pick Line tool to draw a reference plane.

1. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane) …
2. To draw a line: On the Draw panel, click (Line). …
3. To pick an existing line: On the Draw panel, click (Pick Lines).

What is a reference plane how is it used?

In celestial mechanics, the plane of reference (or reference plane) is the plane used to define orbital elements (positions). The two main orbital elements that are measured with respect to the plane of reference are the inclination and the longitude of the ascending node.

What are the different types of reference planes?

1.1 shows the three standard reference planes: the medial (mid-sagittal), the frontal (or coronal), and the transverse planes, all at 90 degrees to each other and usually set to meet in the center of mass of the whole body.

What is a reference line?

A reference line, also referred to as a base line, is a user-defined vertical or horizontal line in the graph. Use reference lines to compare, reference, or measure against the data values displayed in the graph.

How do you lock a reference plane in Revit family?

To constrain the sketch of a piece of geometry during creation:

1. Use the Align tool and select the specific reference plane and the sketch line to establish the constraint.
2. When the lock symbol displays, click it to lock the constraint.

How do you create a reference plane in Solidworks?

Creating Planes

1. Click Plane (Reference Geometry toolbar) or Insert > Reference Geometry > Plane .
2. In the PropertyManager, select an entity for First Reference . …
3. Select a Second Reference and Third Reference as necessary to define the plane. …
4. Click .

How do you show reference planes in 3D Revit?

Simply select the element you are having problems visualizing and then press the right click button of the mouse and select “Maximize 3D Extents” (See above). This will slightly modify the representation of the plane on the current view, but it will make it visible in all other views.