Question: How do I thicken a line in Solidworks?

How do I change the thickness of a line in SolidWorks 2018?

To assign line thickness or style:

1. Click Options (Standard toolbar) and select the Document Properties tab.
2. Set style and thickness for the following: All dimension leaders. All annotation leaders. Frames for geometric tolerances, balloons, and datums. Style. Thickness.

How do I change dimension thickness in SolidWorks?

To set line thickness and style:

1. Click Options , and then select the Document Properties tab.
2. Select the type of annotation or dimension for which you intend to customize the frame or leader line thickness.
3. Select a thickness from the list, or select Custom Size and enter a value for the custom thickness.

How do I make a solid line in SolidWorks?

To sketch a line:

1. Click Line. …
2. In the Insert Line PropertyManager under Orientation, select one of the following: …
3. Under Options, select: …
4. Under Parameters, you can do the following, based on the Orientation: …
5. Click in the graphics area and sketch the line. …
6. Complete the line in one of the following ways:

Where is the line format toolbar in Solidworks?

If you’re going to be making a lot of changes, it may be convenient to enable the Line Format toolbar by clicking on View > Toolbars > Line Format. You’ll not only have access to the tools mentioned above but layers as well.

How do I change the font of a line in Solidworks?

Click Tools > Options > Document Properties > Line Font. Select an edge type from the list: Visible Edges, Hidden Edges, Sketch Curves, and so on. Choose a style from the list: Solid, Dashed, Phantom, Chain, and so on. Select a style that defines the ends of edges: Flat, Round, or Square.

How do you change the color of a line in SolidWorks?

Using either the Line Format toolbar or the Layer toolbar, click Layer Properties.

1. In the dialog box that appears, create a new layer and set the color of the layer to red. …
2. Right-mouse click on the component you want to display in the red color and select “Change Layer” from the pop-up menu.

How do you show hidden lines in SolidWorks?

To show or hide hidden edges in the Drawing View Properties dialog box:

1. Right-click the drawing view and select Properties.
2. Select the Show Hidden Edges tab.
3. Select a feature or component from either the drawing view or the FeatureManager design tree to add it to the list of items to be shown with hidden lines.

How do I change the color of a sketch line in SolidWorks?

Use the Sketch/Curve Color PropertyManager to apply color changes to sketches or curves in a model. To open this PropertyManager: Click Edit Sketch or Curve Color . Click Edit > Appearance > Sketch/Curve Color.

How do you add a thickness to a sketch in Solidworks?

Click Thicken on the Features toolbar, or click Insert > Boss/Base > Thicken. Examine the preview, and select the side of the surface you want to thicken, as shown below. Enter the Thickness . Note that when you select Thicken Both Sides , it adds the Thickness you specify to both sides.

How do I change the leader style in Solidworks drawing?

Go to Tools Tab > Under Drawing Styles. Click Leader Styles.

How do I create a template in Solidworks?

To create a template:

1. Click New (Standard toolbar) or File > New.
2. Double-click the type of template that you want to create: Part, Assembly, or Drawing.
3. Click Options. …
4. On the Document Properties tab, select options to customize your new document template, then click OK. …
5. Click File > Save As.

How do you fix a line in Solidworks?

To set a fixed length:

1. Select the spline to dimension.
2. Click Smart Dimension. …
3. Click anywhere on the spline to place the dimension and click. …
4. Drag an endpoint of the spline. …
5. To change the spline’s length, double-click the dimension and enter a new value in the Modify dialog box.

How do I edit lines in Solidworks?

Right-click on an existing section view or its cutting line and click Edit Cutting Line. For some complex section views created with SOLIDWORKS 2013, you must select an insertion point before you can modify them.

How do I change the properties of a line in Solidworks?

To change the format of an existing edge or sketch entity:

1. Select the edge or sketch entity you want to change. To select more than one entity at a time, hold Ctrl as you select.
2. Click a tool on the Line Format toolbar and select a format from the menu. The new format is applied to the selected entities.