How do you use a flat pattern in Solidworks?

How do you insert a flat pattern in Solidworks?

Creating Drawings of Flat Patterns

  1. Open the sheet metal part for which you want to add a drawing.
  2. Click Make Drawing from Part/Assembly. …
  3. Select a format or click OK to use the default format.
  4. From the View Palette, drag the Flat pattern to the drawing sheet. …
  5. Click .

How do you fix a flat pattern in Solidworks?

Correcting the flatten configuration

  1. Open the part file within SOLIDWORKS.
  2. Enable the FLAT-PATTERN configuration within the configuration tab (the Flatten tool will likely be un-toggled)
  3. If the Flatten tool is un-toggled, re-enable it so the sheet metal returns to its flatten state.

How do you make a flat pattern?

Create a Flat Pattern from a Sheet Metal Model

  1. With a single body sheet metal part open, on the ribbon click Sheet Metal tab Flat Pattern panel , click Create Flat Pattern. The flat pattern is created, and displays. …
  2. In the browser, double-click the Folded Model node to return to the folded model state or,

How do you calculate flat pattern for sheet metal?

Flat Length = Length A + Length B – Bend Deduction



To sum up, Sheet metal flat pattern can be calculated using the k factor. And k factor value can be determined by calculating the position of the neutral axis or bend allowance.

IT IS INTERESTING:  Why can't I upload my SVG files to Cricut?

What is flat pattern?

The flat-pattern method is where the entire pattern is drafted on a flat surface from measurements, using rulers, curves and straight-edges.

How do I flatten a surface in Solidworks?

To flatten a surface:

  1. In an open part, click Flatten (Surfaces toolbar) or Insert > Surface > Flatten. …
  2. Select faces in the graphics area or from the FeatureManager design tree.
  3. Then select a vertex. …
  4. In the PropertyManager, click Relief Cuts.

Why is surface flatten greyed out?

The reason for the “Flatten” icon being greyed out was because the sheet metal part had a “Flat Pattern” annotation view and this annotation view was active. By selecting another annotation view, the “Flatten” icon then becomes available again.

How do you Unsuppress a flat Pattern in Solidworks?

Right-click Flat-Pattern and select Unsuppress . Select Process-Bends and all of the features after it. Click Edit > Suppress > This Configuration to suppress all of the selected features.

How do you measure a flat pattern?

Flat pattern measuring lets you sew a better-fitting garment faster.



5.) Determine ease.

Measurement Wearing Ease
Waist Circumference 1 inch
Hip Circumference 2-4 inches
Crotch Length 1-2 inches
Crotch Depth 1/2 inches-1 inch
Special Project