How do you unsplit a surface in Revit?

How do I remove a split element in Revit?

Click Modify tab Modify panel (Split Element). If desired, on the Options Bar, select Delete Inner Segment. When you select this option, Revit removes the segment of the wall or line between selected points.

How do you change the split surface in Revit?

Click Massing & Site tab Modify Site panel (Split Surface). In the drawing area, select the toposurface to split. Revit enters sketch mode. Click Modify | Split Surface tab Draw panel (Pick Lines), or use other sketch tools to split the toposurface.

How do I merge two surfaces in Revit?

You can merge 2 separate toposurfaces into one surface.
…
The surfaces to be merged must overlap or share a common edge.

1. Click Massing & Site tab Modify Site panel (Merge Surfaces).
2. (Optional) On the Options Bar, clear Remove points on common edges. …
3. Select one toposurface to merge.
4. Select another toposurface.

How do you split a component in Revit?

TipYou can split the face of a column.
…

1. Click Modify tab Geometry panel (Split Face).
2. Place the cursor on the element face to highlight it. You may need to press Tab to select the desired face.
3. Click to select the face.
4. Sketch the face area to split. …
5. Click (Finish Edit Mode).

How do you split a part in Revit?

Dividing Parts by Reference

1. In the drawing area, select the part or parts to be divided.
2. Click Modify | Parts tab Part panel (Divide Parts).
3. If you want a gap between the parts resulting from this division, enter a positive value for the Divider gap parameter on the Properties palette, under Constraints.

How do I edit subregion in Revit?

Click Massing & Site tab Modify Site panel (Subregion). Revit Architecture enters sketch mode.
…

1. Select the subregion.
2. On the Subregion panel, click (Edit Boundary).
3. Click (Pick Lines) or use other sketch tools to modify a subregion on the toposurface.

How do you change topography in Revit?

Simplify a Toposurface

1. Click Modify | Topography tab Surface panel (Edit Surface).
2. Click Edit Surface tab Tools panel (Simplify Surface).
3. Open the site plan view and select the toposurface.
4. Enter a value for surface accuracy, and click OK.
5. Click (Finish Surface).

How do you merge in Revit?

Create a merged model

1. Do one of the following: On the Project page, click + New Merged Model. …
2. In the Create New Merged Model dialog, under Folders, navigate to the uploaded models.
3. Under Models, select the models to merge. …
4. Specify a name and click Merge Models.

How do you cut Topography in Revit?

Split a Toposurface

1. Open a site plan or 3D view.
2. Click Site tab Modify Site panel (Split Surface).
3. In the drawing area, select the toposurface to split. …
4. Click Modify | Split Surface tab Draw panel (Pick Lines), or use other sketch tools to split the toposurface.

How do I view Toposurface in Revit?

Step one: Open Visibility/ Graphics Overrides (Found in “view tab/ribbon” or in “properties” window [shortcut “PP”] ) check the box for “Topography” select apply, then okay.