How do you turn on gravity in SOLIDWORKS Simulation?

How do you access simulation in Solidworks?

To display SOLIDWORKS Simulation results in the graphics area:

1. Open an assembly that has a simulation study saved with it.
2. Click the Static 1 tab.
3. In the Simulation Study tree, right click Static 1 and click Run.
4. Click the Model tab.
5. Click Simulation Display (View toolbar) or View > Display > Simulation Display .

How do you isolate a part in Solidworks simulation?

Select a single part, or many parts in the simulated assembly, right-click in the graphics area, and choose the Isolate command. This will temporarily show the part or parts that you have selected, and hide all of the others.

How do I turn on flow simulation in SOLIDWORKS?

To access flow simulation, first go to “Add-Ins” and make sure that the flow simulation check box for “Active Add-Ins is selected. Once the add-in is active, you can activate a new project by going to Tools > Flow Simulation > Project.

What is modal time history analysis?

Use modal time history analysis when the variation of each load with time is known explicitly, and you are interested in the response as a function of time. Typical loads include: Shock (or pulse) loads. General time-varying loads (periodic or non-periodic)

How do you save a solidworks simulation?

Saving Result Plots

1. In the Simulation study tree, right-click the active plot icon and select Save As.
2. Click Plot Tools > Save As (Simulation CommandManager)
3. Right-click in the graphics area, and select Save As.

Is SOLIDWORKS good for CFD?

Solidworks can be good choice for preliminary analysis. Ansys/Fluent (CFD) is choice for accurate results. Ansys fluent of cfx is much better than Solidworks. For CFD purpose Ansys is better user-friendly as compared with Solidworks.